Specification sheet Wheel Loader Ref zettelmeyer-zl802i-wheel-loader
Zettelmeyer ZL802i
The Zettelmeyer ZL802i is a wheel loader with an operating weight of 16,093.75 lb (7,300 kg), a 75 hp engine, and a 1.31 yd³ (1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,093.75lb
7,300kg
Engine power
75hp
56kW
Net Power Bucket capacity
1.31yd³
1m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL802i sits above the median for its class:
- Operating weight 16,090 lb heavier than 68% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | KHD BF 4M 1012 E | |
| Net Power | 75hp | 56kw |
| Gross Power | 78hp | 58.2kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 221.3lb ft | 300Nm |
| Displacement | 195.3cu in | 3.2L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbo + water cooled |
02 Operational Specification
| Operating Weight | 16093.8lb | 7300kg |
|---|---|---|
| Fuel Capacity | 26.5gal | 100L |
| Hydraulic System Fluid Capacity | 29.1gal | 110L |
| Engine Oil Fluid Capacity | 2.4gal | 9L |
| Front Axle/Diff Fluid Capacity | 2.3gal | 8.7L |
| Rear Axle/Diff Fluid Capacity | 3.1gal | 11.5L |
| Static Tipping Weight | 9700.4lb | 4400kg |
| Turning Radius | 14.9ft in | 4525mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 15.5-25 |
03 Transmission Specification
| Transmission Type | hydrostatic full power shift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3045psi | 20994.6kPa |
|---|---|---|
| Pump Flow Capacity | 21.7gal/min | 82L/min |
| Raise Time | 6.5sec | |
| Dump Time | 2sec | |
| Lower Time | 6sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.8ft in | 2680mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.31yd3 | 1m3 |
| Bucket Width | 6.73ft in | 2050mm |
| Breakout Force | 12476.9lb | 55.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.88ft in | 570mm |
|---|---|---|
| Length With Bucket On Ground | 18.38ft in | 5600mm |
| Width Over Tires | 6.53ft in | 1990mm |
| Height To Top Of Cab | 9.39ft in | 2860mm |
| Wheelbase | 7.39ft in | 2250mm |
| Hinge Pin - Max Height | 11.39ft in | 3470mm |
| Reach At Max Lift And Dump | 2.86ft in | 870mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.