Specification sheet Wheel Loader Ref zettelmeyer-zl702b-wheel-loader
Zettelmeyer ZL702B
The Zettelmeyer ZL702B is a wheel loader with an operating weight of 11,023.12 lb (5,000 kg), a 65.1 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,023.12lb
5,000kg
Engine power
65.1hp
48.5kW
Net Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL702B sits below the median for its class:
- Operating weight 11,020 lb lighter than 65% (n=374)
- Engine power 65 hp less powerful than 57% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | KHD BF 4L 1011 F | |
| Net Power | 65.1hp | 48.5kw |
| Gross Power | 68.4hp | 51kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 162.3lb ft | 220Nm |
| Displacement | 166.6cu in | 2.8L |
| Torque Measured @ | 1800rpm | |
| Aspiration | turbo + oil/air cooled |
02 Operational Specification
| Operating Weight | 11023.2lb | 5000kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Hydraulic System Fluid Capacity | 15.9gal | 60L |
| Engine Oil Fluid Capacity | 2.8gal | 10.5L |
| Front Axle/Diff Fluid Capacity | 2.7gal | 10L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 8708.3lb | 3950kg |
| Turning Radius | 13.7ft in | 4150mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 405/70 R20 |
03 Transmission Specification
| Transmission Type | hydrostatic full power shift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3336psi | 23000.9kPa |
|---|---|---|
| Pump Flow Capacity | 13.8gal/min | 52L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.17ft in | 2490mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
| Bucket Width | 6.24ft in | 1900mm |
| Breakout Force | 9217.17lb | 41kN |
06 Dimensions Dimensions
| Ground Clearance | 1.38ft in | 420mm |
|---|---|---|
| Length With Bucket On Ground | 16.47ft in | 5020mm |
| Width Over Tires | 6.22ft in | 1895mm |
| Height To Top Of Cab | 8.67ft in | 2640mm |
| Wheelbase | 6.57ft in | 2000mm |
| Hinge Pin - Max Height | 10.27ft in | 3130mm |
| Reach At Max Lift And Dump | 2.5ft in | 760mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.