Specification sheet Wheel Loader Ref zettelmeyer-zl602-wheel-loader
Zettelmeyer ZL602
The Zettelmeyer ZL602 is a wheel loader with an operating weight of 10,141 lb (4,599.89 kg), a 57 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,141lb
4,599.89kg
Engine power
57hp
42.5kW
Net Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL602 sits below the median for its class:
- Operating weight 10,140 lb lighter than 74% (n=374)
- Engine power 57 hp less powerful than 71% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | KHD BF4 L 1011T | |
| Net Power | 57hp | 42.5kw |
| Gross Power | 59.7hp | 44.5kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 147.6lb ft | 200Nm |
| Displacement | 167cu in | 2.8L |
| Torque Measured @ | 1800rpm | |
| Aspiration | turbo + oil/air cooled |
02 Operational Specification
| Operating Weight | 10141lb | 4599.9kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Hydraulic System Fluid Capacity | 15.9gal | 60L |
| Engine Oil Fluid Capacity | 2.8gal | 10.5L |
| Front Axle/Diff Fluid Capacity | 2.7gal | 10L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 7738.3lb | 3510kg |
| Turning Radius | 13.5ft in | 4090mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 12.5-20 |
03 Transmission Specification
| Transmission Type | hydrostatic full power shift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3190.9psi | 22000kPa |
|---|---|---|
| Pump Flow Capacity | 13.3gal/min | 50L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.11ft in | 2470mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
| Bucket Width | 5.75ft in | 1750mm |
| Breakout Force | 9104.77lb | 40.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 480mm |
|---|---|---|
| Length With Bucket On Ground | 16.9ft in | 5150mm |
| Width Over Tires | 5.68ft in | 1730mm |
| Height To Top Of Cab | 8.58ft in | 2615mm |
| Wheelbase | 6.57ft in | 2000mm |
| Hinge Pin - Max Height | 10.24ft in | 3120mm |
| Reach At Max Lift And Dump | 2.33ft in | 710mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.