Specification sheet Wheel Loader Ref zettelmeyer-zl601-wheel-loader
Zettelmeyer ZL601
The Zettelmeyer ZL601 is a wheel loader with an operating weight of 9,038.96 lb (4,100 kg), a 45 hp engine, and a 0.92 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,038.96lb
4,100kg
Engine power
45hp
33.56kW
Gross Power Bucket capacity
0.92yd³
0.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL601 sits below the median for its class:
- Operating weight 9,040 lb lighter than 83% (n=374)
- Engine power 45 hp less powerful than 87% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2360 | |
| Engine Model | 3 L 3 30 S | |
| Gross Power | 45hp | 33.6kw |
| Power Measured @ | 3000rpm | |
| Max Torque | 89.3lb ft | 121Nm |
| Displacement | 129.8cu in | 2.2L |
| Torque Measured @ | 2100rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 9039lb | 4100kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Hydraulic System Fluid Capacity | 13.3gal | 50L |
| Engine Oil Fluid Capacity | 2gal | 7.5L |
| Front Axle/Diff Fluid Capacity | 1gal | 3.5L |
| Rear Axle/Diff Fluid Capacity | 2gal | 7.5L |
| Static Tipping Weight | 5996.6lb | 2720kg |
| Turning Radius | 14.3ft in | 4350mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 12.5-20 |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900.8psi | 20000kPa |
|---|---|---|
| Pump Flow Capacity | 11.1gal/min | 42L/min |
| Raise Time | 6.5sec | |
| Dump Time | 1.8sec | |
| Lower Time | 3sec | |
| Pump Type | gear type tandem |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.04ft in | 2450mm |
|---|---|---|
| Breakout Force | 8767.55lb | 39kN |
| Bucket Capacity - Heaped | 0.92yd3 | 0.7m3 |
| Bucket Capacity - Struck | 0.79yd3 | 0.6m3 |
| Bucket Width | 5.75ft in | 1750mm |
06 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 16.41ft in | 5000mm |
| Height To Top Of Cab | 8.83ft in | 2690mm |
| Wheelbase | 6.4ft in | 1950mm |
| Hinge Pin - Max Height | 10.11ft in | 3080mm |
| Reach At Max Lift And Dump | 2.43ft in | 740mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.