Specification sheet Wheel Loader Ref zettelmeyer-zl502c-wheel-loader
Zettelmeyer ZL502C
The Zettelmeyer ZL502C is a wheel loader with an operating weight of 9,700 lb (4,399.85 kg), a 47 hp engine, and a 0.92 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,700lb
4,399.85kg
Engine power
47hp
35.1kW
Net Power Bucket capacity
0.92yd³
0.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL502C sits below the median for its class:
- Operating weight 9,700 lb lighter than 78% (n=374)
- Engine power 47 hp less powerful than 86% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | KHD F4 L 1011 F | |
| Net Power | 47hp | 35.1kw |
| Gross Power | 48hp | 35.8kw |
| Power Measured @ | 2800rpm | |
| Max Torque | 95lb ft | 128.9Nm |
| Displacement | 167cu in | 2.8L |
| Torque Measured @ | 1800rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 9700lb | 4399.9kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Hydraulic System Fluid Capacity | 15.9gal | 60L |
| Engine Oil Fluid Capacity | 2.8gal | 10.5L |
| Front Axle/Diff Fluid Capacity | 2.7gal | 10L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 7495.8lb | 3400kg |
| Turning Radius | 13.3ft in | 4050mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 12.5-18 |
03 Transmission Specification
| Transmission Type | hydrostatic full power shift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335psi | 22994kPa |
|---|---|---|
| Pump Flow Capacity | 11.9gal/min | 45L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec | |
| Pump Type | control valve 3-spool |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.92yd3 | 0.7m3 |
| Bucket Width | 5.75ft in | 1750mm |
| Breakout Force | 9037.32lb | 40.21kN |
06 Dimensions Dimensions
| Ground Clearance | 1.42ft in | 430mm |
|---|---|---|
| Length With Bucket On Ground | 16.38ft in | 4990mm |
| Width Over Tires | 5.68ft in | 1730mm |
| Height To Top Of Cab | 8.49ft in | 2585mm |
| Wheelbase | 6.57ft in | 2000mm |
| Hinge Pin - Max Height | 10.14ft in | 3090mm |
| Reach At Max Lift And Dump | 2.7ft in | 820mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.