Specification sheet Wheel Loader Ref zettelmeyer-zl502b-wheel-loader
Zettelmeyer ZL502B
The Zettelmeyer ZL502B is a wheel loader with an operating weight of 9,250 lb (4,195.73 kg), a 47 hp engine, and a 0.92 yd³ (0.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,250lb
4,195.73kg
Engine power
47hp
35kW
Net Power Bucket capacity
0.92yd³
0.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL502B sits below the median for its class:
- Operating weight 9,250 lb lighter than 81% (n=374)
- Engine power 47 hp less powerful than 86% (n=367)
- Bucket capacity 0.9 yd³ smaller-bucket than 84% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | KHD F4L 1011 F | |
| Net Power | 47hp | 35kw |
| Gross Power | 48.3hp | 36kw |
| Power Measured @ | 2800rpm | |
| Max Torque | 95.2lb ft | 129Nm |
| Displacement | 166.6cu in | 2.8L |
| Torque Measured @ | 1800rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 9250lb | 4195.8kg |
|---|---|---|
| Fuel Capacity | 15.9gal | 60L |
| Hydraulic System Fluid Capacity | 15.9gal | 60L |
| Engine Oil Fluid Capacity | 2.8gal | 10.5L |
| Front Axle/Diff Fluid Capacity | 2.7gal | 10L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 6880lb | 3120.8kg |
| Turning Radius | 13.4ft in | 4065mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 12.5-18 |
03 Transmission Specification
| Transmission Type | hydrostatic full powershift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3191psi | 22001.2kPa |
|---|---|---|
| Pump Flow Capacity | 11.9gal/min | 45L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.92yd3 | 0.7m3 |
| Bucket Width | 5.75ft in | 1750mm |
| Breakout Force | 8655.15lb | 38.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 16.38ft in | 4990mm |
| Width Over Tires | 5.68ft in | 1730mm |
| Height To Top Of Cab | 8.49ft in | 2585mm |
| Wheelbase | 6.57ft in | 2000mm |
| Hinge Pin - Max Height | 10.14ft in | 3090mm |
| Reach At Max Lift And Dump | 2.6ft in | 790mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.