Specification sheet Wheel Loader Ref zettelmeyer-zl501-wheel-loader
Zettelmeyer ZL501
The Zettelmeyer ZL501 is a wheel loader with an operating weight of 9,259.42 lb (4,200 kg), a 48 hp engine, and a 1.71 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,259.42lb
4,200kg
Engine power
48hp
35.8kW
Net Power Bucket capacity
1.71yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL501 sits below the median for its class:
- Operating weight 9,260 lb lighter than 80% (n=374)
- Engine power 48 hp less powerful than 83% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 69% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 2 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4L 1011 | |
| Net Power | 48hp | 35.8kw |
| Gross Power | 48hp | 35.8kw |
| Power Measured @ | 2800rpm | |
| Max Torque | 95.2lb ft | 129Nm |
| Torque Measured @ | 1800rpm |
02 Operational Specification
| Operating Weight | 9259.5lb | 4200kg |
|---|---|---|
| Static Tipping Weight | 6944.6lb | 3150kg |
| Turning Radius | 14.2ft in | 4300mm |
| Operating Voltage | 12V | |
| Tire Size | 12.5-18 |
03 Transmission Specification
| Max Speed - Forward | 12.5mph | 20km/h |
|---|
04 Bucket Dimensions
| Dump Clearance At Max Raise | 8.11ft in | 2470mm |
|---|---|---|
| Breakout Force | 8655.15lb | 38.5kN |
| Bucket Capacity - Heaped | 1.71yd3 | 1.3m3 |
| Bucket Capacity - Struck | 0.92yd3 | 0.7m3 |
| Bucket Width | 5.75ft in | 1750mm |
05 Dimensions Dimensions
| Ground Clearance | 1.4ft in | 425mm |
|---|---|---|
| Length With Bucket On Ground | 16.11ft in | 4910mm |
| Height To Top Of Cab | 8.86ft in | 2700mm |
| Wheelbase | 6.4ft in | 1950mm |
| Hinge Pin - Max Height | 10.01ft in | 3050mm |
| Reach At Max Lift And Dump | 2.37ft in | 720mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.