Specification sheet Wheel Loader Ref zettelmeyer-zl5001f-wheel-loader
Zettelmeyer ZL5001F
The Zettelmeyer ZL5001F is a wheel loader with an operating weight of 52,249.56 lb (23,700 kg), a 269 hp engine, and a 7.85 yd³ (6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
52,249.56lb
23,700kg
Engine power
269hp
200.6kW
Gross Power Bucket capacity
7.85yd³
6m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Zettelmeyer ZL5001F sits in the middle of its class:
- Operating weight 52,250 lb lighter than 55% (n=198)
- Engine power 269 hp less powerful than 58% (n=190)
- Bucket capacity 7.8 yd³ larger-bucket than 97% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 10 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F 10L 413F | |
| Gross Power | 269hp | 200.6kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 748.7lb ft | 1015Nm |
| Displacement | 973.6cu in | 16L |
| Torque Measured @ | 1400rpm |
02 Operational Specification
| Operating Weight | 52249.6lb | 23700kg |
|---|---|---|
| Fuel Capacity | 118.9gal | 450L |
| Hydraulic System Fluid Capacity | 105.7gal | 400L |
| Engine Oil Fluid Capacity | 7.4gal | 28L |
| Transmission Fluid Capacity | 11.9gal | 45L |
| Front Axle/Diff Fluid Capacity | 5.5gal | 20.5L |
| Rear Axle/Diff Fluid Capacity | 5.5gal | 20.5L |
| Static Tipping Weight | 40785.6lb | 18500kg |
| Turning Radius | 22.8ft in | 6920mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 16degrees | |
| Tire Size | 26.5R25 |
03 Transmission Specification
| Transmission Type | full powershift planetary | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 38.6mph | 62km/h |
| Max Speed - Reverse | 38.6mph | 62km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2610.7psi | 18000kPa |
|---|---|---|
| Pump Flow Capacity | 99.6gal/min | 377L/min |
| Raise Time | 6.8sec | |
| Dump Time | 1.7sec | |
| Lower Time | 4.6sec | |
| Pump Type | gear type tandem |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.73ft in | 3270mm |
|---|---|---|
| Breakout Force | 46085.83lb | 205kN |
| Bucket Capacity - Heaped | 7.85yd3 | 6m3 |
| Bucket Capacity - Struck | 4.58yd3 | 3.5m3 |
| Bucket Width | 9.85ft in | 3000mm |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 29.01ft in | 8840mm |
| Height To Top Of Cab | 11.62ft in | 3540mm |
| Wheelbase | 11.49ft in | 3500mm |
| Hinge Pin - Max Height | 14.64ft in | 4460mm |
| Reach At Max Lift And Dump | 3.55ft in | 1080mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.