Specification sheet Wheel Loader Ref zettelmeyer-zl5001-wheel-loader

Zettelmeyer ZL5001

The Zettelmeyer ZL5001 is a wheel loader with an operating weight of 50,265.4 lb (22,800 kg), a 252.12 hp engine, and a 5.24 yd³ (4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
50,265.4lb
22,800kg
Engine power
252.12hp
188kW
Gross Power
Bucket capacity
5.24yd³
4m³

Where it sits in its classpercentile · medium wheel loaders

Among 198 medium wheel loaders (45,000–90,000 lb), the Zettelmeyer ZL5001 sits below the median for its class:

  • Operating weight 50,270 lb lighter than 74% (n=198)
  • Engine power 252 hp less powerful than 79% (n=190)
  • Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)

Scale drawingdrawn to scale · mm

3480B480C9050A
Side elevation

01 Engine Specification

Number Of Cylinders 10
Engine Model KHD F10 L 413 F
Gross Power 252.2hp 188kw
Power Measured @ 2200rpm
Max Torque 748.7lb ft 1015Nm
Displacement 973.6cu in 16L
Torque Measured @ 1600rpm

02 Operational Specification

Operating Weight 50265.4lb 22800kg
Fuel Capacity 118.9gal 450L
Hydraulic System Fluid Capacity 105.7gal 400L
Engine Oil Fluid Capacity 7.4gal 28L
Static Tipping Weight 32848.9lb 14900kg
Turning Radius 22.7ft in 6890mm
Operating Voltage 24V
Alternator Supplied Amperage 27amps
Tire Size 23.5R25

03 Transmission Specification

Number Of Forward Gears 4
Number Of Reverse Gears 4
Max Speed - Forward 37.3mph 60km/h
Max Speed - Reverse 37.3mph 60km/h

04 Hydraulic System Specification

Relief Valve Setting 2610.7psi 18000kPa
Pump Flow Capacity 99.6gal/min 377L/min
Raise Time 6.5sec
Dump Time 1.6sec
Lower Time 4.6sec

05 Bucket Dimensions

Dump Clearance At Max Raise 10.21ft in 3110mm
Breakout Force 44961.79lb 200kN
Bucket Capacity - Heaped 5.24yd3 4m3
Bucket Capacity - Struck 4.45yd3 3.4m3
Bucket Width 9.03ft in 2750mm

06 Dimensions Dimensions

Ground Clearance 1.58ft in 480mm
Length With Bucket On Ground 29.7ft in 9050mm
Height To Top Of Cab 11.42ft in 3480mm
Wheelbase 11.49ft in 3500mm
Hinge Pin - Max Height 14.44ft in 4400mm
Reach At Max Lift And Dump 4.11ft in 1250mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.