Specification sheet Wheel Loader Ref zettelmeyer-zl42c-wheel-loader
Zettelmeyer ZL42C
The Zettelmeyer ZL42C is a wheel loader with an operating weight of 21,825.77 lb (9,900 kg), a 110 hp engine, and a 2.23 yd³ (1.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
21,825.77lb
9,900kg
Engine power
110hp
82kW
Net Power Bucket capacity
2.23yd³
1.7m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL42C sits at the heavy end of its class:
- Operating weight 21,830 lb heavier than 99% (n=374)
- Engine power 110 hp more powerful than 89% (n=367)
- Bucket capacity 2.2 yd³ larger-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F6L912 | |
| Net Power | 110hp | 82kw |
| Gross Power | 118.1hp | 88kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 262.6lb ft | 356Nm |
| Displacement | 345cu in | 5.7L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 21825.8lb | 9900kg |
|---|---|---|
| Fuel Capacity | 52.9gal | 200L |
| Hydraulic System Fluid Capacity | 39.7gal | 150L |
| Engine Oil Fluid Capacity | 4.4gal | 16.5L |
| Front Axle/Diff Fluid Capacity | 4.9gal | 18.5L |
| Rear Axle/Diff Fluid Capacity | 6gal | 22.5L |
| Static Tipping Weight | 16314.3lb | 7400kg |
| Turning Radius | 16.9ft in | 5150mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 17amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 20.5-25 (L-2) 12 Ply |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Max Speed - Forward | 23mph | 37km/h |
| Max Speed - Reverse | 23mph | 37km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900.8psi | 20000kPa |
|---|---|---|
| Pump Flow Capacity | 41.1gal/min | 155.5L/min |
| Raise Time | 6sec | |
| Dump Time | 1.8sec | |
| Lower Time | 3.6sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.17ft in | 2795mm |
|---|---|---|
| Breakout Force | 20907.23lb | 93kN |
| Bucket Capacity - Heaped | 2.23yd3 | 1.7m3 |
| Bucket Capacity - Struck | 1.84yd3 | 1.4m3 |
| Bucket Width | 8.21ft in | 2500mm |
06 Dimensions Dimensions
| Ground Clearance | 1.58ft in | 480mm |
|---|---|---|
| Length With Bucket On Ground | 21.1ft in | 6430mm |
| Height To Top Of Cab | 10.11ft in | 3080mm |
| Wheelbase | 8.37ft in | 2550mm |
| Hinge Pin - Max Height | 12.01ft in | 3660mm |
| Reach At Max Lift And Dump | 2.43ft in | 740mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.