Specification sheet Wheel Loader Ref zettelmeyer-zl402c-wheel-loader
Zettelmeyer ZL402C
The Zettelmeyer ZL402C is a wheel loader with an operating weight of 7,500 lb (3,401.95 kg), a 36 hp engine, and a 0.66 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,500lb
3,401.95kg
Engine power
36hp
26.9kW
Net Power Bucket capacity
0.66yd³
0.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL402C sits at the compact end of its class:
- Operating weight 7,500 lb lighter than 89% (n=374)
- Engine power 36 hp less powerful than 94% (n=367)
- Bucket capacity 0.7 yd³ smaller-bucket than 93% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Model | KHD F 3 L 1011F | |
| Net Power | 36hp | 26.9kw |
| Gross Power | 38hp | 28.4kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 84lb ft | 113.9Nm |
| Displacement | 125cu in | 2.1L |
| Torque Measured @ | 1800rpm |
02 Operational Specification
| Operating Weight | 7500lb | 3402kg |
|---|---|---|
| Fuel Capacity | 11.1gal | 42L |
| Hydraulic System Fluid Capacity | 15.9gal | 60L |
| Engine Oil Fluid Capacity | 1.9gal | 7L |
| Front Axle/Diff Fluid Capacity | 1.5gal | 5.5L |
| Rear Axle/Diff Fluid Capacity | 2.2gal | 8L |
| Static Tipping Weight | 5511.6lb | 2500kg |
| Turning Radius | 12ft in | 3650mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 10.5-18 |
03 Transmission Specification
| Transmission Type | hydrostatic full powershift | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3050psi | 21029kPa |
|---|---|---|
| Pump Flow Capacity | 8.5gal/min | 32L/min |
| Raise Time | 6sec | |
| Dump Time | 2.5sec | |
| Lower Time | 5sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.91ft in | 2410mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.66yd3 | 0.5m3 |
| Bucket Width | 5.42ft in | 1650mm |
| Breakout Force | 7420lb | 33kN |
06 Dimensions Dimensions
| Ground Clearance | 1.01ft in | 305mm |
|---|---|---|
| Length With Bucket On Ground | 14.74ft in | 4490mm |
| Width Over Tires | 5.29ft in | 1610mm |
| Height To Top Of Cab | 8.17ft in | 2490mm |
| Wheelbase | 6.07ft in | 1850mm |
| Hinge Pin - Max Height | 9.78ft in | 2980mm |
| Reach At Max Lift And Dump | 2.07ft in | 630mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.