Specification sheet Wheel Loader Ref zettelmeyer-zl4001b-wheel-loader
Zettelmeyer ZL4001B
The Zettelmeyer ZL4001B is a wheel loader with an operating weight of 52,470.02 lb (23,800 kg), a 269 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
52,470.02lb
23,800kg
Engine power
269hp
200.6kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Zettelmeyer ZL4001B sits in the middle of its class:
- Operating weight 52,470 lb lighter than 53% (n=198)
- Engine power 269 hp less powerful than 58% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 10 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F 10L 413F | |
| Net Power | 269hp | 200.6kw |
| Gross Power | 302hp | 225.3kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 748.7lb ft | 1015Nm |
| Displacement | 973.6cu in | 16L |
| Torque Measured @ | 1400rpm | |
| Aspiration | direct |
02 Operational Specification
| Operating Weight | 52470.1lb | 23800kg |
|---|---|---|
| Fuel Capacity | 111gal | 420L |
| Hydraulic System Fluid Capacity | 121.6gal | 460L |
| Engine Oil Fluid Capacity | 7.4gal | 28L |
| Transmission Fluid Capacity | 10.6gal | 40L |
| Front Axle/Diff Fluid Capacity | 11.1gal | 42L |
| Rear Axle/Diff Fluid Capacity | 11.1gal | 42L |
| Static Tipping Weight | 42769.7lb | 19400kg |
| Turning Radius | 22.7ft in | 6900mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 26.5-25PR(L2) |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.9mph | 40km/h |
| Max Speed - Reverse | 24.9mph | 40km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2610psi | 17995.4kPa |
|---|---|---|
| Pump Flow Capacity | 99.9gal/min | 378L/min |
| Raise Time | 6.8sec | |
| Dump Time | 1.7sec | |
| Lower Time | 4.6sec | |
| Pump Type | gear tandem |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.08ft in | 3070mm |
|---|---|---|
| Breakout Force | 42713.7lb | 190kN |
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
| Bucket Capacity - Struck | 4.58yd3 | 3.5m3 |
| Bucket Width | 9.85ft in | 3000mm |
06 Dimensions Dimensions
| Ground Clearance | 1.74ft in | 530mm |
|---|---|---|
| Length With Bucket On Ground | 28.22ft in | 8600mm |
| Height To Top Of Cab | 11.67ft in | 3555mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 14.41ft in | 4390mm |
| Reach At Max Lift And Dump | 3.52ft in | 1070mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.