Specification sheet Wheel Loader Ref zettelmeyer-zl302-wheel-loader
Zettelmeyer ZL302
The Zettelmeyer ZL302 is a wheel loader with an operating weight of 4,188.79 lb (1,900 kg), a 28.2 hp engine, and a 0.4 yd³ (0.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
4,188.79lb
1,900kg
Engine power
28.2hp
21kW
Net Power Bucket capacity
0.4yd³
0.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL302 sits at the compact end of its class:
- Operating weight 4,190 lb lighter than 98% (n=374)
- Engine power 28 hp less powerful than 97% (n=367)
- Bucket capacity 0.4 yd³ smaller-bucket than 99% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | KHD F4 M 1008 | |
| Net Power | 28.2hp | 21kw |
| Gross Power | 29.6hp | 22kw |
| Power Measured @ | 3000rpm | |
| Max Torque | 56.1lb ft | 76Nm |
| Displacement | 74.5cu in | 1.3L |
| Torque Measured @ | 1850rpm | |
| Aspiration | indirect injection |
02 Operational Specification
| Operating Weight | 4188.8lb | 1900kg |
|---|---|---|
| Fuel Capacity | 10.1gal | 38L |
| Hydraulic System Fluid Capacity | 7.4gal | 28L |
| Engine Oil Fluid Capacity | 1.2gal | 4.3L |
| Front Axle/Diff Fluid Capacity | 1.4gal | 5L |
| Rear Axle/Diff Fluid Capacity | 1.6gal | 6L |
| Static Tipping Weight | 2866.1lb | 1300kg |
| Turning Radius | 9.9ft in | 3000mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 10.0/75-15.3 |
03 Transmission Specification
| Transmission Type | hydrostatic full power shift | |
|---|---|---|
| Number Of Forward Gears | 1 | |
| Number Of Reverse Gears | 1 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900psi | 19994.8kPa |
|---|---|---|
| Pump Flow Capacity | 5.6gal/min | 21L/min |
| Raise Time | 6sec | |
| Dump Time | 2.5sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 6.6ft in | 2010mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.4yd3 | 0.3m3 |
| Bucket Width | 4.43ft in | 1350mm |
| Breakout Force | 4383.78lb | 19.5kN |
06 Dimensions Dimensions
| Ground Clearance | 0.76ft in | 230mm |
|---|---|---|
| Length With Bucket On Ground | 12.93ft in | 3940mm |
| Width Over Tires | 4.24ft in | 1290mm |
| Height To Top Of Cab | 7.58ft in | 2310mm |
| Wheelbase | 4.93ft in | 1500mm |
| Hinge Pin - Max Height | 8.34ft in | 2540mm |
| Reach At Max Lift And Dump | 1.51ft in | 460mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.