Specification sheet Wheel Loader Ref zettelmeyer-zl3002-wheel-loader
Zettelmeyer ZL3002
The Zettelmeyer ZL3002 is a wheel loader with an operating weight of 41,887.84 lb (19,000 kg), a 197 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
41,887.84lb
19,000kg
Engine power
197hp
147kW
Net Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Zettelmeyer ZL3002 sits at the heavy end of its class:
- Operating weight 41,890 lb heavier than 91% (n=439)
- Engine power 197 hp more powerful than 74% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 61% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CT 8.3 | |
| Net Power | 197hp | 147kw |
| Gross Power | 208hp | 155.2kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 560.6lb ft | 760Nm |
| Displacement | 504.7cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 41887.9lb | 19000kg |
|---|---|---|
| Fuel Capacity | 95.2gal | 360L |
| Hydraulic System Fluid Capacity | 60.8gal | 230L |
| Engine Oil Fluid Capacity | 5.1gal | 19L |
| Transmission Fluid Capacity | 7.4gal | 28L |
| Front Axle/Diff Fluid Capacity | 8.2gal | 31L |
| Rear Axle/Diff Fluid Capacity | 8.2gal | 31L |
| Static Tipping Weight | 34612.6lb | 15700kg |
| Turning Radius | 22.5ft in | 6850mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5-25 16PR |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.8mph | 35km/h |
| Max Speed - Reverse | 13.4mph | 21.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335.9psi | 23000kPa |
|---|---|---|
| Pump Flow Capacity | 78.8gal/min | 298L/min |
| Raise Time | 6.5sec | |
| Dump Time | 1.7sec | |
| Lower Time | 4.6sec | |
| Pump Type | tandem axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 11.16ft in | 3400mm |
|---|---|---|
| Breakout Force | 53279.72lb | 237kN |
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
| Bucket Capacity - Struck | 3.01yd3 | 2.3m3 |
| Bucket Width | 9.85ft in | 3000mm |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 26.78ft in | 8160mm |
| Height To Top Of Cab | 11.32ft in | 3450mm |
| Wheelbase | 11.65ft in | 3550mm |
| Hinge Pin - Max Height | 14.28ft in | 4350mm |
| Reach At Max Lift And Dump | 3.12ft in | 950mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.