Specification sheet Wheel Loader Ref zettelmeyer-zl3000f-wheel-loader
Zettelmeyer ZL3000F
The Zettelmeyer ZL3000F is a wheel loader with an operating weight of 47,619.86 lb (21,600 kg), a 240 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
47,619.86lb
21,600kg
Engine power
240hp
179kW
Net Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Zettelmeyer ZL3000F sits at the compact end of its class:
- Operating weight 47,620 lb lighter than 86% (n=198)
- Engine power 240 hp less powerful than 85% (n=190)
- Bucket capacity 3.5 yd³ smaller-bucket than 99% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | Berliet | |
|---|---|---|
| Net Power | 240hp | 179kw |
| Gross Power | 251hp | 187.2kw |
02 Operational Specification
| Operating Weight | 47619.9lb | 21600kg |
|---|---|---|
| Fuel Capacity | 118.9gal | 450L |
| Static Tipping Weight | 29762.5lb | 13500kg |
| Operating Voltage | 24V | |
| Tire Size | 23.5R-25 |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 38.6mph | 62km/h |
| Max Speed - Reverse | 38.6mph | 62km/h |
04 Hydraulic System Specification
| Raise Time | 8sec | |
|---|---|---|
| Lower Time | 4.6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.55ft in | 2910mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
| Bucket Width | 9.03ft in | 2750mm |
| Breakout Force | 31473.25lb | 140kN |
06 Dimensions Dimensions
| Ground Clearance | 1.2ft in | 365mm |
|---|---|---|
| Length With Bucket On Ground | 28.22ft in | 8600mm |
| Height To Top Of Cab | 11.16ft in | 3400mm |
| Wheelbase | 11.32ft in | 3450mm |
| Hinge Pin - Max Height | 12.96ft in | 3950mm |
| Reach At Max Lift And Dump | 4.35ft in | 1325mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.