Specification sheet Wheel Loader Ref zettelmeyer-zl22c-wheel-loader

Zettelmeyer ZL22C

The Zettelmeyer ZL22C is a wheel loader with an operating weight of 13,668 lb (6,200 kg), a 73.8 hp engine, and a 1.57 yd³ (1.2 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
13,668lb
6,200kg
Engine power
73.8hp
55kW
Net Power
Bucket capacity
1.57yd³
1.2m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL22C sits in the middle of its class:

  • Operating weight 13,670 lb heavier than 60% (n=374)
  • Engine power 74 hp more powerful than 53% (n=367)
  • Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)

Scale drawingdrawn to scale · mm

2820B530C5400A
Side elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make 2349
Net Power 73.8hp 55kw
Gross Power 77.8hp 58kw
Power Measured @ 2500rpm
Displacement 230.1cu in 3.8L

02 Operational Specification

Operating Weight 13668lb 6200kg
Fuel Capacity 31.8gal 120L
Static Tipping Weight 8377lb 3800kg
Turning Radius 16.1ft in 4880mm
Operating Voltage 12V
Tire Size 15.5-25 EM 10 PR

03 Transmission Specification

Transmission Type 2 speed power drive
Max Speed - Forward 15.6mph 25km/h
Max Speed - Reverse 15.6mph 25km/h

04 Hydraulic System Specification

Relief Valve Setting 2560psi 17650.6kPa
Pump Flow Capacity 25.1gal/min 95L/min
Raise Time 6sec
Lower Time 3.5sec
Pump Type 2 lift/2bucket, double action

05 Bucket Dimensions

Dump Clearance At Max Raise 8.96ft in 2730mm
Breakout Force 13227lb 58.84kN
Bucket Capacity - Heaped 1.57yd3 1.2m3
Bucket Capacity - Struck 1.34yd3 1.02m3
Bucket Width 7.39ft in 2250mm

06 Dimensions Dimensions

Ground Clearance 1.74ft in 530mm
Length With Bucket On Ground 17.72ft in 5400mm
Height To Top Of Cab 9.26ft in 2820mm
Wheelbase 7.22ft in 2200mm
Hinge Pin - Max Height 11.32ft in 3450mm
Reach At Max Lift And Dump 2.33ft in 710mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.