Specification sheet Wheel Loader Ref zettelmeyer-zl2002-wheel-loader
Zettelmeyer ZL2002
The Zettelmeyer ZL2002 is a wheel loader with an operating weight of 28,660.1 lb (13,000 kg), a 166 hp engine, and a 3.27 yd³ (2.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
28,660.1lb
13,000kg
Engine power
166hp
123.8kW
Net Power Bucket capacity
3.27yd³
2.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Zettelmeyer ZL2002 sits below the median for its class:
- Operating weight 28,660 lb lighter than 62% (n=439)
- Engine power 166 hp more powerful than 50% (n=408)
- Bucket capacity 3.3 yd³ larger-bucket than 51% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6 BTA 5.9 | |
| Net Power | 166hp | 123.8kw |
| Gross Power | 178hp | 132.8kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 450lb ft | 610Nm |
| Displacement | 358.9cu in | 5.9L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbo + aftercooled |
02 Operational Specification
| Operating Weight | 28660.1lb | 13000kg |
|---|---|---|
| Fuel Capacity | 60.8gal | 230L |
| Hydraulic System Fluid Capacity | 45gal | 170L |
| Engine Oil Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 7.4gal | 28L |
| Front Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Rear Axle/Diff Fluid Capacity | 6.9gal | 26L |
| Static Tipping Weight | 23765.9lb | 10780kg |
| Turning Radius | 19.2ft in | 5850mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25 16PR |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335.9psi | 23000kPa |
|---|---|---|
| Pump Flow Capacity | 60.8gal/min | 230L/min |
| Raise Time | 6sec | |
| Dump Time | 1.6sec | |
| Lower Time | 4.5sec | |
| Pump Type | tandem axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.65ft in | 2940mm |
|---|---|---|
| Breakout Force | 31136.04lb | 138.5kN |
| Bucket Capacity - Heaped | 3.27yd3 | 2.5m3 |
| Bucket Capacity - Struck | 2.88yd3 | 2.21m3 |
| Bucket Width | 8.54ft in | 2600mm |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 23.46ft in | 7150mm |
| Height To Top Of Cab | 10.27ft in | 3130mm |
| Wheelbase | 9.85ft in | 3000mm |
| Hinge Pin - Max Height | 12.64ft in | 3850mm |
| Reach At Max Lift And Dump | 3.55ft in | 1080mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.