Specification sheet Wheel Loader Ref zettelmeyer-zl18d-wheel-loader
Zettelmeyer ZL18D
The Zettelmeyer ZL18D is a wheel loader with an operating weight of 12,588.4 lb (5,710 kg), a 62.5 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,588.4lb
5,710kg
Engine power
62.5hp
46.7kW
Net Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL18D sits in the middle of its class:
- Operating weight 12,590 lb heavier than 50% (n=374)
- Engine power 63 hp less powerful than 60% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4L912 | |
| Net Power | 62.5hp | 46.7kw |
| Gross Power | 79hp | 59kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 158.6lb ft | 215Nm |
| Displacement | 230.1cu in | 3.8L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 12588.4lb | 5710kg |
|---|---|---|
| Fuel Capacity | 25.1gal | 95L |
| Hydraulic System Fluid Capacity | 19.9gal | 75L |
| Engine Oil Fluid Capacity | 3.1gal | 11.5L |
| Front Axle/Diff Fluid Capacity | 2.3gal | 8.7L |
| Rear Axle/Diff Fluid Capacity | 3gal | 11L |
| Static Tipping Weight | 8818.5lb | 4000kg |
| Turning Radius | 14.1ft in | 4285mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 33amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 14.5-20 |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2900.8psi | 20000kPa |
|---|---|---|
| Pump Flow Capacity | 21.2gal/min | 80L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.35ft in | 2545mm |
|---|---|---|
| Breakout Force | 12769.15lb | 56.8kN |
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
| Bucket Capacity - Struck | 0.95yd3 | 0.72m3 |
| Bucket Width | 6.73ft in | 2050mm |
06 Dimensions Dimensions
| Ground Clearance | 1.71ft in | 520mm |
|---|---|---|
| Length With Bucket On Ground | 17.72ft in | 5400mm |
| Height To Top Of Cab | 9.62ft in | 2930mm |
| Wheelbase | 6.89ft in | 2100mm |
| Hinge Pin - Max Height | 10.5ft in | 3200mm |
| Reach At Max Lift And Dump | 2.56ft in | 780mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.