Specification sheet Wheel Loader Ref zettelmeyer-zl1801-wheel-loader
Zettelmeyer ZL1801
The Zettelmeyer ZL1801 is a wheel loader with an operating weight of 24,912.24 lb (11,300 kg), a 126.1 hp engine, and a 1.97 yd³ (1.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
24,912.24lb
11,300kg
Engine power
126.1hp
94kW
Net Power Bucket capacity
1.97yd³
1.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Zettelmeyer ZL1801 sits below the median for its class:
- Operating weight 24,910 lb lighter than 83% (n=439)
- Engine power 126 hp less powerful than 86% (n=408)
- Bucket capacity 2 yd³ smaller-bucket than 98% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6BT 5.9 | |
| Net Power | 126.1hp | 94kw |
| Gross Power | 134.2hp | 100kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 354.1lb ft | 480Nm |
| Displacement | 358.9cu in | 5.9L |
| Torque Measured @ | 1600rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 24912.3lb | 11300kg |
|---|---|---|
| Fuel Capacity | 60.8gal | 230L |
| Hydraulic System Fluid Capacity | 45gal | 170L |
| Engine Oil Fluid Capacity | 4.3gal | 16L |
| Transmission Fluid Capacity | 7.4gal | 28L |
| Front Axle/Diff Fluid Capacity | 7.1gal | 26.5L |
| Rear Axle/Diff Fluid Capacity | 5.5gal | 20.5L |
| Static Tipping Weight | 20062.1lb | 9100kg |
| Turning Radius | 18.9ft in | 5750mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20-24 12PR |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335.9psi | 23000kPa |
|---|---|---|
| Pump Flow Capacity | 41.5gal/min | 157L/min |
| Raise Time | 6sec | |
| Dump Time | 2.4sec | |
| Lower Time | 3sec | |
| Pump Type | axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.59ft in | 2920mm |
|---|---|---|
| Breakout Force | 26302.65lb | 117kN |
| Bucket Capacity - Heaped | 1.97yd3 | 1.5m3 |
| Bucket Capacity - Struck | 1.64yd3 | 1.25m3 |
| Bucket Width | 8.21ft in | 2500mm |
06 Dimensions Dimensions
| Ground Clearance | 1.45ft in | 440mm |
|---|---|---|
| Length With Bucket On Ground | 21.92ft in | 6680mm |
| Height To Top Of Cab | 10.27ft in | 3130mm |
| Wheelbase | 9.45ft in | 2880mm |
| Hinge Pin - Max Height | 12.24ft in | 3730mm |
| Reach At Max Lift And Dump | 2.6ft in | 790mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.