Specification sheet Wheel Loader Ref zettelmeyer-zl1002si-wheel-loader
Zettelmeyer ZL1002Si
The Zettelmeyer ZL1002Si is a wheel loader with an operating weight of 16,755.14 lb (7,600 kg), a 88 hp engine, and a 1.57 yd³ (1.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,755.14lb
7,600kg
Engine power
88hp
65.7kW
Net Power Bucket capacity
1.57yd³
1.2m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL1002Si sits above the median for its class:
- Operating weight 16,760 lb heavier than 70% (n=374)
- Engine power 88 hp more powerful than 71% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | KHD BF 4M 1013 E | |
| Net Power | 88hp | 65.7kw |
| Gross Power | 92hp | 68.7kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 289.2lb ft | 392Nm |
| Displacement | 290.5cu in | 4.8L |
| Torque Measured @ | 1400rpm | |
| Aspiration | turbo + water cooled |
02 Operational Specification
| Operating Weight | 16755.2lb | 7600kg |
|---|---|---|
| Fuel Capacity | 26.5gal | 100L |
| Hydraulic System Fluid Capacity | 29.1gal | 110L |
| Engine Oil Fluid Capacity | 3.2gal | 12L |
| Front Axle/Diff Fluid Capacity | 3.4gal | 12.5L |
| Rear Axle/Diff Fluid Capacity | 3.6gal | 13.3L |
| Static Tipping Weight | 11684.6lb | 5300kg |
| Turning Radius | 15.8ft in | 4800mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 55amps | |
| Rear Axle Oscillation | 20degrees | |
| Tire Size | 15.5-25 |
03 Transmission Specification
| Transmission Type | hydrostatic full power shift | |
|---|---|---|
| Number Of Forward Gears | 3 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 20.6mph | 33km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3335.9psi | 23000kPa |
|---|---|---|
| Pump Flow Capacity | 28.1gal/min | 106L/min |
| Raise Time | 6sec | |
| Dump Time | 1.5sec | |
| Lower Time | 5sec | |
| Pump Type | axial piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.91ft in | 2715mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.57yd3 | 1.2m3 |
| Bucket Width | 7.39ft in | 2250mm |
| Breakout Force | 14500.18lb | 64.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.94ft in | 590mm |
|---|---|---|
| Length With Bucket On Ground | 18.97ft in | 5780mm |
| Width Over Tires | 7.09ft in | 2160mm |
| Height To Top Of Cab | 9.39ft in | 2860mm |
| Wheelbase | 7.88ft in | 2400mm |
| Hinge Pin - Max Height | 11.39ft in | 3470mm |
| Reach At Max Lift And Dump | 2.63ft in | 800mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.