Specification sheet Wheel Loader Ref zettelmeyer-zl1001-wheel-loader
Zettelmeyer ZL1001
The Zettelmeyer ZL1001 is a wheel loader with an operating weight of 16,358.31 lb (7,420 kg), a 80 hp engine, and a 1.71 yd³ (1.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
16,358.31lb
7,420kg
Engine power
80hp
59.7kW
Net Power Bucket capacity
1.71yd³
1.3m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Zettelmeyer ZL1001 sits above the median for its class:
- Operating weight 16,360 lb heavier than 69% (n=374)
- Engine power 80 hp more powerful than 63% (n=367)
- Bucket capacity 1.7 yd³ larger-bucket than 69% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4L 913 | |
| Net Power | 80hp | 59.7kw |
| Gross Power | 84hp | 62.7kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 188.1lb ft | 255Nm |
| Displacement | 249.4cu in | 4.1L |
| Torque Measured @ | 1550rpm | |
| Aspiration | natural |
02 Operational Specification
| Operating Weight | 16358.4lb | 7420kg |
|---|---|---|
| Fuel Capacity | 29.1gal | 110L |
| Hydraulic System Fluid Capacity | 26.5gal | 100L |
| Engine Oil Fluid Capacity | 3.1gal | 11.5L |
| Front Axle/Diff Fluid Capacity | 3.6gal | 13.5L |
| Rear Axle/Diff Fluid Capacity | 3.9gal | 14.5L |
| Static Tipping Weight | 13778.9lb | 6250kg |
| Turning Radius | 16.1ft in | 4900mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 65amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 15.5-25 10PR (L-2) |
03 Transmission Specification
| Transmission Type | hydrostatic full powershift | |
|---|---|---|
| Max Speed - Forward | 15.6mph | 25km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2610.7psi | 18000kPa |
|---|---|---|
| Pump Flow Capacity | 29.8gal/min | 112.5L/min |
| Raise Time | 6sec | |
| Dump Time | 1sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.01ft in | 2745mm |
|---|---|---|
| Breakout Force | 13488.54lb | 60kN |
| Bucket Capacity - Heaped | 1.71yd3 | 1.3m3 |
| Bucket Capacity - Struck | 1.44yd3 | 1.11m3 |
| Bucket Width | 7.39ft in | 2250mm |
06 Dimensions Dimensions
| Ground Clearance | 2.01ft in | 610mm |
|---|---|---|
| Length With Bucket On Ground | 18.9ft in | 5760mm |
| Height To Top Of Cab | 9.95ft in | 3030mm |
| Wheelbase | 7.88ft in | 2400mm |
| Hinge Pin - Max Height | 11.39ft in | 3470mm |
| Reach At Max Lift And Dump | 2.33ft in | 710mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.