Specification sheet Wheel Loader Ref yto-zl50g-wheel-loader
YTO ZL50G
The YTO ZL50G is a wheel loader with an operating weight of 36,376.28 lb (16,500 kg), a 217.25 hp engine, and a 3.93 yd³ (3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
36,376.28lb
16,500kg
Engine power
217.25hp
162kW
Gross Power Bucket capacity
3.93yd³
3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the YTO ZL50G sits above the median for its class:
- Operating weight 36,380 lb heavier than 71% (n=439)
- Engine power 217 hp more powerful than 88% (n=408)
- Bucket capacity 3.9 yd³ larger-bucket than 72% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Model | WEICHAI WD615 67G3-28 | |
|---|---|---|
| Gross Power | 217.3hp | 162kw |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 36376.3lb | 16500kg |
|---|---|---|
| Fuel Capacity | 58.2gal | 220L |
| Hydraulic System Fluid Capacity | 58.2gal | 220L |
| Static Tipping Weight | 11023.2lb | 5000kg |
| Turning Radius | 19.4ft in | 5900mm |
03 Transmission Specification
| Number Of Forward Gears | 3 | |
|---|---|---|
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 7.2mph | 11.5km/h |
| Max Speed - Reverse | 10mph | 16km/h |
04 Hydraulic System Specification
| Raise Time | 5.9sec | |
|---|---|---|
| Lower Time | 10.6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.85ft in | 3000mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.93yd3 | 3m3 |
06 Dimensions Dimensions
| Length With Bucket On Ground | 24.09ft in | 7340mm |
|---|---|---|
| Width Over Tires | 9.81ft in | 2990mm |
| Height To Top Of Cab | 11.16ft in | 3400mm |
| Reach At Max Lift And Dump | 3.84ft in | 1170mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.