Specification sheet Wheel Loader Ref yanmar-v8-wheel-loader
Yanmar V8
The Yanmar V8 is a wheel loader with an operating weight of 10,802.66 lb (4,900 kg), a 60 hp engine, and a 1.05 yd³ (0.81 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,802.66lb
4,900kg
Engine power
60hp
44.8kW
Net Power Bucket capacity
1.05yd³
0.81m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Yanmar V8 sits below the median for its class:
- Operating weight 10,800 lb lighter than 66% (n=374)
- Engine power 60 hp less powerful than 65% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Deutz | |
| Engine Model | TCD 2.9 L4 | |
| Net Power | 60hp | 44.8kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 240 Nm | |
| Displacement | 177cu in | 3L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 10802.7lb | 4900kg |
|---|---|---|
| Fuel Capacity | 20gal | 75.8L |
| Hydraulic System Fluid Capacity | 15gal | 56.8L |
| Static Tipping Weight | 8311.5lb | 3770kg |
| Turning Radius | 13.7ft in | 4160mm |
| Operating Voltage | 12V | |
| Rear Axle Oscillation | 8degrees | |
| Tire Size | 405/70 R 18 SPT 9 Dunlop |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 22.4mph | 36km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 17gal/min | 64.4L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.37ft in | 2550mm |
|---|---|---|
| Bucket Width | 6.07ft in | 1850mm |
| Bucket Capacity - Heaped | 1.05yd3 | 0.81m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.43ft in | 435mm |
|---|---|---|
| Length With Bucket On Ground | 16.61ft in | 5060mm |
| Width Over Tires | 5.84ft in | 1780mm |
| Height To Top Of Cab | 8.67ft in | 2640mm |
| Wheelbase | 6.89ft in | 2100mm |
| Hinge Pin - Max Height | 10.5ft in | 3200mm |
| Reach At Max Lift And Dump | 2.3ft in | 700mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.