Specification sheet Wheel Loader Ref yanmar-v4-7-wheel-loader
Yanmar V4-7
The Yanmar V4-7 is a wheel loader with an operating weight of 8,322 lb (3,774.8 kg), a 40.91 hp engine, and a 0.65 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,322lb
3,774.8kg
Engine power
40.91hp
30.5kW
Gross Power Bucket capacity
0.65yd³
0.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Yanmar V4-7 sits below the median for its class:
- Operating weight 8,320 lb lighter than 85% (n=374)
- Engine power 41 hp less powerful than 89% (n=367)
- Bucket capacity 0.7 yd³ smaller-bucket than 94% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Model | 4TNV88C-NKAH | |
| Gross Power | 41hp | 30.5kw |
| Power Measured @ | 2500rpm | |
| Displacement | 133.6cu in | 2.2L |
| Aspiration | Water-cooled |
02 Operational Specification
| Operating Weight | 8322lb | 3774.8kg |
|---|---|---|
| Static Tipping Weight | 6070lb | 2753.4kg |
| Turning Radius | 12.5ft in | 3810mm |
| Rear Axle Oscillation | 8degrees | |
| Tire Size | 15.5/60-18-8PR |
03 Transmission Specification
| Transmission Type | Automatic Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 11.9mph | 19km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 14.8gal/min | 56L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.94ft in | 2420mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.65yd3 | 0.5m3 |
| Breakout Force | 6092.33lb | 27.1kN |
06 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Length With Bucket On Ground | 14.52ft in | 4425mm |
| Width Over Tires | 5.55ft in | 1690mm |
| Height To Top Of Cab | 8.39ft in | 2555mm |
| Wheelbase | 6.17ft in | 1880mm |
| Hinge Pin - Max Height | 9.86ft in | 3005mm |
| Reach At Max Lift And Dump | 2.6ft in | 790mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.