Specification sheet Wheel Loader Ref yanmar-v4-6-wheel-loader
Yanmar V4-6
The Yanmar V4-6 is a wheel loader with an operating weight of 8,410.64 lb (3,815 kg), a 40.4 hp engine, and a 0.66 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,410.64lb
3,815kg
Engine power
40.4hp
30.13kW
Gross Power Bucket capacity
0.66yd³
0.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Yanmar V4-6 sits below the median for its class:
- Operating weight 8,410 lb lighter than 85% (n=374)
- Engine power 40 hp less powerful than 89% (n=367)
- Bucket capacity 0.7 yd³ smaller-bucket than 93% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 4TNV88-BNKAH | |
| Gross Power | 40.4hp | 30.2kw |
| Power Measured @ | 2500rpm | |
| Displacement | 133.6cu in | 2.2L |
02 Operational Specification
| Operating Weight | 8410.7lb | 3815kg |
|---|---|---|
| Static Tipping Weight | 5976lb | 2710.7kg |
| Turning Radius | 12.8ft in | 3875mm |
| Rear Axle Oscillation | 8degrees | |
| Tire Size | 15.5/60-18-8PR |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 11.8mph | 19km/h |
| Max Speed - Reverse | 11.8mph | 19km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 14.8gal/min | 56L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.94ft in | 2420mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.66yd3 | 0.5m3 |
06 Dimensions Dimensions
| Ground Clearance | 0.99ft in | 300mm |
|---|---|---|
| Length With Bucket On Ground | 14.44ft in | 4400mm |
| Width Over Tires | 5.25ft in | 1600mm |
| Height To Top Of Cab | 8.4ft in | 2560mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.