Specification sheet Wheel Loader Ref yanmar-v3-6-wheel-loader
Yanmar V3-6
The Yanmar V3-6 is a wheel loader with an operating weight of 7,154 lb (3,245 kg), a 30.2 hp engine, and a 0.53 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,154lb
3,245kg
Engine power
30.2hp
22.53kW
Gross Power Bucket capacity
0.53yd³
0.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Yanmar V3-6 sits at the compact end of its class:
- Operating weight 7,150 lb lighter than 91% (n=374)
- Engine power 30 hp less powerful than 96% (n=367)
- Bucket capacity 0.5 yd³ smaller-bucket than 96% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 3TNV88-BNKAH | |
| Gross Power | 30.2hp | 22.6kw |
| Power Measured @ | 2500rpm | |
| Displacement | 100.2cu in | 1.7L |
02 Operational Specification
| Operating Weight | 7154lb | 3245kg |
|---|---|---|
| Static Tipping Weight | 4785lb | 2170.5kg |
| Turning Radius | 11.8ft in | 3585mm |
| Rear Axle Oscillation | 8degrees | |
| Tire Size | 12.5/70-16-6PR |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 11.8mph | 19km/h |
| Max Speed - Reverse | 11.8mph | 19km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 10.7gal/min | 40.5L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 6.99ft in | 2130mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.53yd3 | 0.4m3 |
06 Dimensions Dimensions
| Length With Bucket On Ground | 13.18ft in | 4015mm |
|---|---|---|
| Width Over Tires | 5.55ft in | 1690mm |
| Height To Top Of Cab | 8.4ft in | 2560mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.