Specification sheet Wheel Loader Ref yanmar-v12-wheel-loader
Yanmar V12
The Yanmar V12 is a wheel loader with an operating weight of 15,432.36 lb (7,000 kg), a 100 hp engine, and a 1.57 yd³ (1.21 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
15,432.36lb
7,000kg
Engine power
100hp
74.6kW
Net Power Bucket capacity
1.57yd³
1.21m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Yanmar V12 sits above the median for its class:
- Operating weight 15,430 lb heavier than 66% (n=374)
- Engine power 100 hp more powerful than 80% (n=367)
- Bucket capacity 1.6 yd³ larger-bucket than 59% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Deutz | |
| Engine Model | TCD 3.6 L4 | |
| Net Power | 100hp | 74.6kw |
| Power Measured @ | 2200rpm | |
| Displacement | 220cu in | 3.7L |
02 Operational Specification
| Operating Weight | 15432.4lb | 7000kg |
|---|---|---|
| Fuel Capacity | 29gal | 109.8L |
| Hydraulic System Fluid Capacity | 25gal | 94.7L |
| Engine Oil Fluid Capacity | 2gal | 7.6L |
| Cooling System Fluid Capacity | 3.9gal | 14.8L |
| Static Tipping Weight | 11023.2lb | 5000kg |
| Turning Radius | 15.4ft in | 4680mm |
| Operating Voltage | 12V | |
| Tire Size | 405/70 R 20 SPT 9 Dunlop |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 22.4mph | 36km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 20gal/min | 75.8L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.8ft in | 2680mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.57yd3 | 1.21m3 |
| Bucket Width | 6.89ft in | 2100mm |
| Breakout Force | 13263.73lb | 59kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 17.98ft in | 5480mm |
| Width Over Tires | 6.5ft in | 1980mm |
| Height To Top Of Cab | 9.13ft in | 2780mm |
| Wheelbase | 7.52ft in | 2290mm |
| Hinge Pin - Max Height | 11.55ft in | 3520mm |
| Reach At Max Lift And Dump | 2.6ft in | 790mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.