Specification sheet Wheel Loader Ref yanmar-v10-wheel-loader
Yanmar V10
The Yanmar V10 is a wheel loader with an operating weight of 12,786.82 lb (5,800 kg), a 74 hp engine, and a 1.31 yd³ (1.01 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,786.82lb
5,800kg
Engine power
74hp
55.2kW
Net Power Bucket capacity
1.31yd³
1.01m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Yanmar V10 sits in the middle of its class:
- Operating weight 12,790 lb heavier than 53% (n=374)
- Engine power 74 hp more powerful than 53% (n=367)
- Bucket capacity 1.3 yd³ smaller-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Deutz | |
| Engine Model | TCD 2.9 L4 | |
| Net Power | 74hp | 55.2kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 300 Nm | |
| Displacement | 177cu in | 3L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 12786.9lb | 5800kg |
|---|---|---|
| Fuel Capacity | 29gal | 109.8L |
| Hydraulic System Fluid Capacity | 23gal | 87.1L |
| Static Tipping Weight | 9634.3lb | 4370kg |
| Turning Radius | 14.6ft in | 4445mm |
| Operating Voltage | 12V | |
| Tire Size | 405/70 R 20 SPT 9 Dunlop |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Max Speed - Forward | 22.4mph | 36km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 19gal/min | 72L/min |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.65ft in | 2635mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.31yd3 | 1.01m3 |
| Bucket Width | 6.4ft in | 1950mm |
| Breakout Force | 12364.5lb | 55kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 17.29ft in | 5270mm |
| Width Over Tires | 6.07ft in | 1850mm |
| Height To Top Of Cab | 9.08ft in | 2765mm |
| Wheelbase | 7.29ft in | 2220mm |
| Hinge Pin - Max Height | 11.06ft in | 3370mm |
| Reach At Max Lift And Dump | 2.33ft in | 710mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.