Specification sheet Skid Steer Loader Ref yanmar-s270v-1-skid-steer-loader

Yanmar S270V-1

The Yanmar S270V-1 is a skid steer loader with an operating weight of 8,150.49 lb (3,697 kg), a 70.68 hp engine, a rated operating capacity of 2,700.7 lb (1,225 kg), and a tipping load of 5,399.2 lb (2,449.04 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,150.49lb
3,697kg
Engine power
70.68hp
52.7kW
Net Power
Rated operating capacity
2,700.7lb
1,225kg
Tipping load
5,399.2lb † — value reconstructed from related published figures
2,449.04kg

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Yanmar S270V-1 sits above the median for its class:

  • Operating weight 8,150 lb heavier than 83% (n=334)
  • Engine power 71 hp more powerful than 61% (n=335)
  • Rated operating capacity 2,700 lb higher-rated than 86% (n=288)

◇Scale drawingdrawn to scale · mm

4252C203D3759A2959B
Side elevation
4252C1765E
Front elevation

01 Engine Specification

Engine Make Yanmar
Engine Model 4TNV98CT - NMS
Net Power 70.7hp 52.7kw
Power Measured @ 2500rpm
Displacement 203cu in 3.4L

02 Capacities Specification

Rated Operating Capacity 2700.7lb 1225kg

03 Operational Specification

Operational Weight 8150.5lb 3697kg
Fuel Capacity 20gal 75.7L
Max Speed 12mph 19.2km/h
Tire Size 12.00 x 16.5 HD

04 Electrical Specification

Alternator 90amps
Starter Size 12-volt (3.0 kW)
Battery 12-volt (950 CCA)

05 Loader Specification

Bucket Width 70in 1778mm

06 Hydraulic Specification

Hydraulic Reservoir 10.5gal 39.8L
Auxiliary Hydraulic Flow 23.6gal/min 89L/min
Pump Flow Capacity 34.9gal/min 132L/min
Relief Valve Pressure 3200psi 22063.3kPa

07 Dimensions Dimensions

Length With Bucket 12.34ft in 3759mm
Ground Clearance 8in 203mm
Height To Top Of Cab 13.96ft in 4252mm
Wheelbase 4.13ft in 1257mm
Length W/O Bucket 9.71ft in 2959mm
Reach At Max Lift And Dump 32.01in 813mm
Hinge Pin Height - Fully Raised 130.32in 3310mm
Dump Angle 42degrees
Front Departure Angle 25degrees
Overall Height, Rops Cab 80.99in 2057mm
Overall Width 5.8ft in 1765mm
Rollback - Ground Level 29degrees
Ground Height 40in 1016mm
Dump Height 8.34ft in 2540mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.