Specification sheet Wheel Loader Ref wacker-neuson-wl60t-wheel-loader
Wacker Neuson WL60T
The Wacker Neuson WL60T is a wheel loader with an operating weight of 13,448 lb (6,099.92 kg), a 102 hp engine, and a 1.5 yd³ (1.15 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,448lb
6,099.92kg
Engine power
102hp
76.1kW
Net Power Bucket capacity
1.5yd³
1.15m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL60T sits in the middle of its class:
- Operating weight 13,450 lb heavier than 59% (n=374)
- Engine power 102 hp more powerful than 82% (n=367)
- Bucket capacity 1.5 yd³ larger-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Perkins | |
| Engine Model | 854F-E34TA | |
| Net Power | 102hp | 76.1kw |
| Power Measured @ | 2500rpm | |
| Displacement | 207.4cu in | 3.4L |
02 Operational Specification
| Payload | 7433.9lb | 3372kg |
|---|---|---|
| Operating Weight | 13448lb | 6100kg |
| Fuel Capacity | 27.3gal | 103.4L |
| Hydraulic System Fluid Capacity | 100.3gal | 379.7L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 120amps | |
| Tire Size | 600/40-22.5 AS ET-50 |
03 Transmission Specification
| Travel Speed | 12.4mph | 20km/h |
|---|
04 Hydraulic System Specification
| Pump Flow Capacity | 26gal/min | 98.5L/min |
|---|---|---|
| Relief Valve Pressure | 3408.4psi | 23500.1kPa |
05 Bucket Dimensions
| Tipping Load Standard Bucket | 7433.9lb | 3371.97kg |
|---|---|---|
| Bucket Capacity - Heaped | 1.5yd3 | 1.15m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.19ft in | 360mm |
|---|---|---|
| Length With Bucket On Ground | 17.07ft in | 5200mm |
| Width Over Tires | 6.83ft in | 2080mm |
| Height To Top Of Cab | 8.79ft in | 2679mm |
| Wheelbase | 7.19ft in | 2189mm |
| Hinge Pin - Max Height | 5.28ft in | 1607mm |
| Reach At Max Lift And Dump | 3.06ft in | 931mm |
| Overall Length | 20.99ft in | 6396mm |
| Dump Angle | 33degrees | |
| Articulation Angle | 42 | |
| Overhang Rear | 5.5ft in | 1676mm |
| Track Width | 55.99in | 1422mm |
| Turning Radius - Inside | 6.41ft in | 1951mm |
?Questions & answersfrom this machine's data
- How much does a Wacker Neuson WL60T wheel loader weigh?
- A Wacker Neuson WL60T wheel loader has an operating weight of 13,448 lb (6,099.9 kg).
- What engine does a Wacker Neuson WL60T wheel loader have?
- A Wacker Neuson WL60T wheel loader is powered by a Perkins 854F-E34TA engine producing 102 hp (76.1 kW).
- What size bucket does a Wacker Neuson WL60T wheel loader have?
- A Wacker Neuson WL60T wheel loader has a bucket capacity of 1.5 yd³ (1.2 m³).
- How much fuel does a Wacker Neuson WL60T wheel loader hold?
- A Wacker Neuson WL60T wheel loader has a fuel capacity of 27.3 gal (103.4 L).
- What is the ground clearance of a Wacker Neuson WL60T wheel loader?
- A Wacker Neuson WL60T wheel loader has a ground clearance of 1.2 ft (360 mm).
- How long is a Wacker Neuson WL60T wheel loader?
- A Wacker Neuson WL60T wheel loader has an overall length of 17.1 ft (5,200 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.