Specification sheet Wheel Loader Ref wacker-neuson-wl60-wheel-loader
Wacker Neuson WL60
The Wacker Neuson WL60 is a wheel loader with an operating weight of 13,007 lb (5,899.9 kg), a 102 hp engine, and a 1.5 yd³ (1.15 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,007lb
5,899.9kg
Engine power
102hp
76.07kW
Gross Power Bucket capacity
1.5yd³
1.15m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL60 sits in the middle of its class:
- Operating weight 13,010 lb heavier than 54% (n=374)
- Engine power 102 hp more powerful than 82% (n=367)
- Bucket capacity 1.5 yd³ larger-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Perkins | |
| Engine Model | 854F-E34TA | |
| Gross Power | 102hp | 76.1kw |
| Power Measured @ | 2500rpm | |
| Alternator | 120amps |
02 Capacities Specification
| Hydraulic Oil Tank | 25.1gal | 95L |
|---|---|---|
| Fuel Tank | 27.8gal | 105L |
03 Operational Specification
| Max Speed | 12mph | 19.4km/h |
|---|---|---|
| Operating Voltage | 12V | |
| Tire Size | 405/70-18EM ET0 |
04 Weights Specification
| Breakout Force Maximum | 7898lb ft | 10708.3Nm |
|---|---|---|
| Operating Weight | 13007lb | 5899.9kg |
05 Hydraulic System Specification
| Pump Flow Capacity | 26gal/min | 98.5L/min |
|---|---|---|
| Relief Valve Pressure | 6454.3psi | 44500.7kPa |
06 Bucket Dimensions
| Dumping Angle, Top | 33degrees | |
|---|---|---|
| Bucket Capacity - Heaped | 1.5yd3 | 1.15m3 |
07 Dimensions Dimensions
| Ground Clearance | 1.24ft in | 375mm |
|---|---|---|
| Length With Bucket On Ground | 19.36ft in | 5898mm |
| Width Over Tires | 6.01ft in | 1829mm |
| Height To Top Of Cab | 8.84ft in | 2693mm |
| Wheelbase | 7.06ft in | 2150mm |
| Overall Length | 15.69ft in | 4780mm |
| Track Width | 55.99in | 1422mm |
| Turning Radius | 5.47ft in | 1666mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.