Specification sheet Wheel Loader Ref wacker-neuson-wl52-wheel-loader
Wacker Neuson WL52
The Wacker Neuson WL52 is a wheel loader with an operating weight of 11,243.5 lb (5,100 kg), a 75 hp engine, and a 0.99 yd³ (0.75 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,243.5lb
5,100kg
Engine power
75hp
55.93kW
Gross Power Bucket capacity
0.99yd³
0.75m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL52 sits in the middle of its class:
- Operating weight 11,240 lb lighter than 60% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 1 yd³ smaller-bucket than 80% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Deutz | |
| Engine Model | TCD 2.9 L4 | |
| Gross Power | 75hp | 56kw |
| Power Measured @ | 2300rpm | |
| Displacement | 177cu in | 3L |
| Alternator | 95amps |
02 Capacities Specification
| Hydraulic Oil Tank | 17.5gal | 66L |
|---|---|---|
| Fuel Tank | 21.7gal | 82L |
03 Operational Specification
| Max Speed | 12.5mph | 20.1km/h |
|---|---|---|
| Operating Voltage | 12V | |
| Tire Size | 405/70-18 EM ET 0 |
04 Weights Specification
| Breakout Force Maximum | 9538.6lb ft | 12932.7Nm |
|---|---|---|
| Lifting Force Maximum | 6755.5lb | 3064.3kg |
| Operating Weight | 11243.5lb | 5100kg |
05 Hydraulic System Specification
| Pump Flow Capacity | 15gal/min | 56.8L/min |
|---|---|---|
| Relief Valve Pressure | 6454.3psi | 44500.7kPa |
06 Bucket Dimensions
| Dumping Angle, Top | 39degrees | |
|---|---|---|
| Bucket Capacity - Heaped | 0.99yd3 | 0.75m3 |
07 Dimensions Dimensions
| Ground Clearance | 1.2ft in | 364mm |
|---|---|---|
| Length With Bucket On Ground | 15.26ft in | 4649mm |
| Width Over Tires | 6.15ft in | 1874mm |
| Height To Top Of Cab | 8.59ft in | 2616mm |
| Wheelbase | 6.59ft in | 2008mm |
| Overall Length | 18.01ft in | 5489mm |
| Track Width | 53.59in | 1361mm |
| Turning Radius | 5.05ft in | 1538mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.