Specification sheet Wheel Loader Ref wacker-neuson-wl50-wheel-loader
Wacker Neuson WL50
The Wacker Neuson WL50 is a wheel loader with an operating weight of 10,659.35 lb (4,835 kg), a 75 hp engine, and a 0.99 yd³ (0.75 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,659.35lb
4,835kg
Engine power
75hp
55.93kW
Gross Power Bucket capacity
0.99yd³
0.75m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL50 sits below the median for its class:
- Operating weight 10,660 lb lighter than 68% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 1 yd³ smaller-bucket than 80% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | BF4M 2011 | |
| Gross Power | 75hp | 56kw |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 10659.4lb | 4835kg |
|---|---|---|
| Fuel Capacity | 23.8gal | 90L |
| Hydraulic System Fluid Capacity | 21.2gal | 80L |
| Static Tipping Weight | 6869.7lb | 3116kg |
| Turning Radius | 12.9ft in | 3908mm |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 405/70-18 EM |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Max Speed - Forward | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|---|---|
| Pump Flow Capacity | 17gal/min | 64L/min |
| Pump Type | Gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.43ft in | 2569mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.99yd3 | 0.75m3 |
| Breakout Force | 7713lb | 34.31kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 17.78ft in | 5417mm |
|---|---|---|
| Width Over Tires | 6.04ft in | 1840mm |
| Height To Top Of Cab | 8.54ft in | 2602mm |
| Wheelbase | 6.58ft in | 2005mm |
| Hinge Pin - Max Height | 10.95ft in | 3336mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.