Specification sheet Wheel Loader Ref wacker-neuson-wl38-wheel-loader
Wacker Neuson WL38
The Wacker Neuson WL38 is a wheel loader with an operating weight of 9,259 lb (4,199.9 kg), a 74 hp engine, and a 0.79 yd³ (0.61 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,259lb
4,199.9kg
Engine power
74hp
55.19kW
Gross Power Bucket capacity
0.79yd³
0.61m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL38 sits below the median for its class:
- Operating weight 9,260 lb lighter than 81% (n=374)
- Engine power 74 hp more powerful than 53% (n=367)
- Bucket capacity 0.8 yd³ smaller-bucket than 89% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Deutz | |
| Engine Model | TCD 2.9 L4 | |
| Gross Power | 74hp | 55.2kw |
| Power Measured @ | 2600rpm | |
| Displacement | 135.2cu in | 2.3L |
| Alternator | 85amps |
02 Capacities Specification
| Hydraulic Oil Tank | 13.3gal | 50L |
|---|---|---|
| Fuel Tank | 17.2gal | 65L |
03 Operational Specification
| Max Speed | 12.4mph | 20km/h |
|---|---|---|
| Operating Voltage | 12V | |
| Tire Size | 15/55-18 EM ET 0 |
04 Weights Specification
| Breakout Force Maximum | 9280lb ft | 12582Nm |
|---|---|---|
| Lifting Force Maximum | 4850lb | 2200kg |
| Operating Weight | 9259lb | 4199.9kg |
05 Hydraulic System Specification
| Pump Flow Capacity | 14.6gal/min | 55.3L/min |
|---|---|---|
| Relief Valve Pressure | 6454psi | 44498.8kPa |
06 Bucket Dimensions
| Bucket Capacity - Heaped | 0.79yd3 | 0.61m3 |
|---|---|---|
| Dumping Angle, Top | 42degrees |
07 Dimensions Dimensions
| Ground Clearance | 1.03ft in | 312mm |
|---|---|---|
| Length With Bucket On Ground | 14.05ft in | 4281mm |
| Width Over Tires | 5.16ft in | 1570mm |
| Height To Top Of Cab | 8.26ft in | 2515mm |
| Wheelbase | 6.71ft in | 2045mm |
| Overall Length | 16.86ft in | 5138mm |
| Turning Radius | 5.39ft in | 1640mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.