Specification sheet Wheel Loader Ref wacker-neuson-wl36-wheel-loader

Wacker Neuson WL36

The Wacker Neuson WL36 is a wheel loader with an operating weight of 8,002.8 lb (3,630 kg), a 47.88 hp engine, and a 0.79 yd³ (0.61 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
8,002.8lb
3,630kg
Engine power
47.88hp
35.71kW
Gross Power
Bucket capacity
0.79yd³
0.61m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL36 sits at the compact end of its class:

  • Operating weight 8,000 lb lighter than 86% (n=374)
  • Engine power 48 hp less powerful than 84% (n=367)
  • Bucket capacity 0.8 yd³ smaller-bucket than 89% (n=309)

Scale drawingdrawn to scale · mm

2310B297C4126A
Side elevation
2310B1570D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make Perkins
Engine Model 404 D-22
Gross Power 47.9hp 35.7kw
Power Measured @ 2600rpm
Displacement 2216cu in 36.4L
Alternator 65amps

02 Capacities Specification

Front Axle 244.1cu in 4L
Hydraulic Oil Tank 17.2gal 65L
Coolant (Engine) 2.7gal 10L
Fuel Tank 14.6gal 55L
Rear Axle 1.3gal 4.7L
Hydraulic System 19.9gal 75L
Engine Oil 2.2gal 8.3L

03 Operational Specification

Max Speed 12.4mph 20km/h
Operating Voltage 12V
Tire Size 31x15.5-15EM ET-37

04 Weights Specification

Lifting Force Maximum 18364.6lb 8330kg
Breakout Force Maximum 8780lb ft 11904.1Nm
Operating Weight 8002.8lb 3630kg

05 Hydraulic System Specification

Pump Flow Capacity 16.5gal/min 62.5L/min
Relief Valve Pressure 3045psi 20994.6kPa

06 Bucket Dimensions

Bucket Capacity - Heaped 0.79yd3 0.61m3

07 Dimensions Dimensions

Ground Clearance 0.98ft in 297mm
Length With Bucket On Ground 13.54ft in 4126mm
Width Over Tires 5.16ft in 1570mm
Height To Top Of Cab 7.58ft in 2310mm
Wheelbase 6.63ft in 2020mm
Overall Length 16.28ft in 4960mm
Track Width 47.25in 1200mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.