Specification sheet Wheel Loader Ref wacker-neuson-wl34-wheel-loader

Wacker Neuson WL34

The Wacker Neuson WL34 is a wheel loader with an operating weight of 7,209.1 lb (3,270 kg), a 48 hp engine, and a 0.78 yd³ (0.6 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,209.1lb
3,270kg
Engine power
48hp
35.8kW
Gross Power
Bucket capacity
0.78yd³
0.6m³

Where it sits in its classpercentile · compact wheel loaders

Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL34 sits at the compact end of its class:

  • Operating weight 7,210 lb lighter than 89% (n=374)
  • Engine power 48 hp less powerful than 83% (n=367)
  • Bucket capacity 0.8 yd³ smaller-bucket than 90% (n=309)

Scale drawingdrawn to scale · mm

2335B294C4126A
Side elevation
2335B1570D
Front elevation

01 Engine Specification

Number Of Cylinders 4
Engine Make Perkins
Engine Model 404F-22
Gross Power 48hp 35.8kw
Power Measured @ 2600rpm
Displacement 135.2cu in 2.3L
Alternator 77amps

02 Capacities Specification

Front Axle 244.1cu in 4L
Hydraulic Oil Tank 17.2gal 65L
Coolant (Engine) 2.7gal 10L
Fuel Tank 14.6gal 55L
Rear Axle 1.3gal 4.7L
Hydraulic System 19.9gal 75L
Engine Oil 2.2gal 8L

03 Operational Specification

Max Speed 12.4mph 20km/h
Operating Voltage 12V
Tire Size 31x15.5-15EM ET-37

04 Weights Specification

Lifting Force Maximum 8331lb 3778.9kg
Breakout Force Maximum 9952lb ft 13493.2Nm
Operating Weight 7209.1lb 3270kg

05 Hydraulic System Specification

Pump Flow Capacity 13gal/min 49L/min
Relief Valve Pressure 3045.9psi 21000.4kPa

06 Bucket Dimensions

Bucket Capacity - Heaped 0.78yd3 0.6m3

07 Dimensions Dimensions

Ground Clearance 0.97ft in 294mm
Length With Bucket On Ground 13.54ft in 4126mm
Width Over Tires 5.16ft in 1570mm
Height To Top Of Cab 7.67ft in 2335mm
Wheelbase 6.63ft in 2020mm
Overall Length 16.28ft in 4960mm
Track Width 49.61in 1260mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.