Specification sheet Wheel Loader Ref wacker-neuson-wl25-wheel-loader
Wacker Neuson WL25
The Wacker Neuson WL25 is a wheel loader with an operating weight of 5,555.65 lb (2,520 kg), a 33 hp engine, and a 0.46 yd³ (0.35 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,555.65lb
2,520kg
Engine power
33hp
24.61kW
Gross Power Bucket capacity
0.46yd³
0.35m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson WL25 sits at the compact end of its class:
- Operating weight 5,560 lb lighter than 95% (n=374)
- Engine power 33 hp less powerful than 95% (n=367)
- Bucket capacity 0.5 yd³ smaller-bucket than 96% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2351 | |
| Engine Model | 404 C-15 | |
| Gross Power | 33hp | 24.7kw |
02 Operational Specification
| Operating Weight | 5555.7lb | 2520kg |
|---|---|---|
| Fuel Capacity | 11.9gal | 45L |
| Hydraulic System Fluid Capacity | 7.2gal | 27L |
| Static Tipping Weight | 3584.8lb | 1626kg |
| Turning Radius | 9.6ft in | 2912mm |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 10 x 16.5 EM |
03 Transmission Specification
| Transmission Type | Hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Max Speed - Forward | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2683psi | 18498.7kPa |
|---|---|---|
| Pump Flow Capacity | 11.9gal/min | 45L/min |
| Pump Type | Gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 6.72ft in | 2047mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.46yd3 | 0.35m3 |
| Breakout Force | 4471lb | 19.89kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 13.41ft in | 4087mm |
|---|---|---|
| Width Over Tires | 3.97ft in | 1210mm |
| Height To Top Of Cab | 7.25ft in | 2208mm |
| Wheelbase | 5.29ft in | 1612mm |
| Hinge Pin - Max Height | 9.39ft in | 2862mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.