Specification sheet Skid Steer Loader Ref wacker-neuson-sw28-skid-steer-loader
Wacker Neuson SW28
The Wacker Neuson SW28 is a skid steer loader with an operating weight of 8,253 lb (3,743.5 kg), and a 74 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,253lb
3,743.5kg
Engine power
74hp
55.2kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Wacker Neuson SW28 sits at the heavy end of its class:
- Operating weight 8,250 lb heavier than 86% (n=334)
- Engine power 74 hp more powerful than 69% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Gross Power | 74hp | 55.2kw |
|---|---|---|
| Power Measured @ | 2750rpm |
02 Operational Specification
| Operational Weight | 8253lb | 3743.5kg |
|---|---|---|
| Max Speed | 11.2mph | 18.1km/h |
| Hydraulic System Fluid Capacity | 22.5gal | 85.2L |
03 Loader Specification
| Bucket Breakout Force (Iso 14397) | 6717lb | 3046.8kg |
|---|---|---|
| Boom Breakout Force | 5705lb | 25.4kN |
| Bucket Width | 72.1in | 1830mm |
04 Hydraulic Specification
| Relief Valve Pressure | 3338psi | 23014.7kPa |
|---|
05 Dimensions Dimensions
| Length With Bucket | 12.02ft in | 3662mm |
|---|---|---|
| Width Over Tires | 5.84ft in | 1778mm |
| Ground Clearance | 9.45in | 240mm |
| Height To Top Of Cab | 6.83ft in | 2080mm |
| Wheelbase | 3.82ft in | 1164mm |
| Length W/O Bucket | 9.66ft in | 2942mm |
| Clearance At Max Lift And Dump | 8.93ft in | 2721mm |
| Reach At Max Lift And Dump | 35.2in | 894mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.