Specification sheet Skid Steer Loader Ref wacker-neuson-sw16-skid-steer-loader
Wacker Neuson SW16
The Wacker Neuson SW16 is a skid steer loader with an operating weight of 6,170.74 lb (2,799 kg), and a 56 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,170.74lb
2,799kg
Engine power
56hp
41.8kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Wacker Neuson SW16 sits below the median for its class:
- Operating weight 6,170 lb lighter than 66% (n=334)
- Engine power 56 hp less powerful than 66% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Kohler | |
|---|---|---|
| Engine Model | KDI 1903 TCR | |
| Gross Power | 56hp | 41.8kw |
| Power Measured @ | 2750rpm | |
| Displacement | 11.6cu in | 0.2L |
02 Operational Specification
| Operational Weight | 6170.8lb | 2799kg |
|---|---|---|
| Fuel Capacity | 30gal | 113.6L |
| Hydraulic System Fluid Capacity | 2.9gal | 11L |
| Max Speed | 12mph | 19.4km/h |
| Tire Size | 10 x 16.5 |
03 Loader Specification
| Bucket Breakout Force (Iso 14397) | 5300lb | 2404.1kg |
|---|---|---|
| Boom Breakout Force | 5000lb | 22.3kN |
04 Hydraulic Specification
| Pump Flow Capacity | 20gal/min | 75.8L/min |
|---|---|---|
| Relief Valve Pressure | 3500psi | 24131.7kPa |
05 Dimensions Dimensions
| Length With Bucket | 11.25ft in | 3426mm |
|---|---|---|
| Width Over Tires | 5.5ft in | 1674mm |
| Ground Clearance | 7.6in | 193mm |
| Height To Top Of Cab | 6.8ft in | 2070mm |
| Wheelbase | 3.63ft in | 1105mm |
| Length W/O Bucket | 8.89ft in | 2708mm |
| Clearance At Max Lift And Dump | 7.55ft in | 2301mm |
| Reach At Max Lift And Dump | 28.12in | 714mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.