Specification sheet Compact Track Loader Ref wacker-neuson-st45-multi-terrain-loader
Wacker Neuson ST45
The Wacker Neuson ST45 is a compact track loader with an operating weight of 10,244.89 lb (4,647 kg), and a 74.3 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,244.89lb
4,647kg
Engine power
74.3hp
55.4kW
Gross Power ◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Wacker Neuson ST45 sits above the median for its class:
- Operating weight 10,240 lb heavier than 74% (n=182)
- Engine power 74 hp more powerful than 59% (n=167)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emission Tier Level | Tier 4 Final | |
|---|---|---|
| Engine Model | Perkins 854 | |
| Gross Power | 74.3hp | 55.4kw |
| Aspiration | Turbo Charged |
02 Operational Specification
| Operating Weight | 10244.9lb | 4647kg |
|---|---|---|
| Fuel Capacity | 24.7gal | 93.5L |
| Max Speed - Low Range | 4.3mph | 6.9km/h |
| Max Speed - High Range | 8.7mph | 14km/h |
03 Loader Specification
| Rollback - Ground Level | 30.5degrees | |
|---|---|---|
| Bucket Rollback At Max Height | 45.5degrees | |
| Boom Breakout Force | 5305.5lb | 23.6kN |
| Tipping Angle | 38degrees | |
| Bucket Width | 78in | 1981mm |
| Bucket Breakout Force | 6721.8lb | 29.9kN |
04 Hydraulic Specification
| Pump Flow | 22.9gal/min | 86.5L/min |
|---|---|---|
| Relief Valve Pressure | 3335.9psi | 23000kPa |
05 Dimensions Dimensions
| Width Over Tracks | 1.48ft in | 450mm |
|---|---|---|
| Height To Top Of Cab | 6.83ft in | 2080mm |
| Ground Clearance | 9.45in | 240mm |
| Length Of Track On Ground | 5.25ft in | 1600mm |
| Dump Reach | 34.34in | 872mm |
| Dump Height - Maximum | 107.13in | 2721mm |
| Hinge Pin Height - Fully Raised | 135.36in | 3438mm |
| Angle Of Departure | 30degrees | |
| Length With Bucket | 12ft in | 3655mm |
| Length With Out Bucket | 9.66ft in | 2942mm |
| Overall Height | 6.83ft in | 2080mm |
| Wheelbase | 5.25ft in | 1600mm |
| Width - No Bucket | 75.99in | 1930mm |
| Dump Angle | 38degrees |
?Questions & answersfrom this machine's data
- How much does a Wacker Neuson ST45 compact track loader weigh?
- A Wacker Neuson ST45 compact track loader has an operating weight of 10,244.9 lb (4,647 kg).
- What engine does a Wacker Neuson ST45 compact track loader have?
- A Wacker Neuson ST45 compact track loader is powered by a Perkins 854 engine producing 74.3 hp (55.4 kW).
- How much fuel does a Wacker Neuson ST45 compact track loader hold?
- A Wacker Neuson ST45 compact track loader has a fuel capacity of 24.7 gal (93.5 L).
- What is the ground clearance of a Wacker Neuson ST45 compact track loader?
- A Wacker Neuson ST45 compact track loader has a ground clearance of 9.5 in (240 mm).
- How long is a Wacker Neuson ST45 compact track loader?
- A Wacker Neuson ST45 compact track loader has an overall length of 12 ft (3,655 mm) with the bucket on the ground.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.