Specification sheet Compact Track Loader Ref wacker-neuson-st28-multi-terrain-loader
Wacker Neuson ST28
The Wacker Neuson ST28 is a compact track loader with an operating weight of 7,829 lb (3,551.18 kg), and a 74 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,829lb
3,551.18kg
Engine power
74hp
55.2kW
Gross Power ◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Wacker Neuson ST28 sits below the median for its class:
- Operating weight 7,830 lb lighter than 74% (n=182)
- Engine power 74 hp more powerful than 54% (n=167)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Kohler | |
|---|---|---|
| Engine Model | KDI 2504 TCR | |
| Gross Power | 74hp | 55.2kw |
| Power Measured @ | 2750rpm | |
| Displacement | 151.5cu in | 2.5L |
02 Operational Specification
| Operating Weight | 7829lb | 3551.2kg |
|---|---|---|
| Fuel Capacity | 30gal | 113.6L |
| Max Speed - Low Range | 7mph | 11.3km/h |
| Max Speed - High Range | 10mph | 16.1km/h |
03 Loader Specification
| Bucket Breakout Force (Iso 14397) | 5300lb | 2404.1kg |
|---|---|---|
| Boom Breakout Force | 5000lb | 22.3kN |
| Tipping Angle | 42degrees |
04 Hydraulic Specification
| Pump Flow | 2.9gal/min | 11L/min |
|---|---|---|
| Relief Valve Pressure | 3500psi | 24131.7kPa |
05 Dimensions Dimensions
| Width Over Tracks | 1.05ft in | 320mm |
|---|---|---|
| Height To Top Of Cab | 6.92ft in | 2108mm |
| Ground Clearance | 9.1in | 231.1mm |
| Clearance At Max Lift And Dump | 7.61ft in | 2319mm |
| Reach At Max Lift And Dump | 2.32ft in | 705mm |
| Length With Bucket | 11.39ft in | 3470mm |
| Length With Out Bucket | 8.89ft in | 2708mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.