Wacker Neuson EZ53
The Wacker Neuson EZ53 is a mini excavator with an operating weight of 14,178 lb, a 58.9 hp engine, and a dig depth of 11.49 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Wacker Neuson EZ53 sits at the heavy end of its class:
- Operating weight 14,180 lb heavier than 94% (n=438)
- Engine power 59 hp more powerful than 96% (n=448)
- Dig depth 11.5 ft deeper-digging than 87% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 18.05ft in | 5,502mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 17.39ft in | 5,300mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.45ft in | 2,576mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.07ft in | 3,679mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 19.23ft in | 5,861mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.75ft in | 2,667mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.49ft in | 3,502mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Standard arm |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 17.91ft in | 5,459mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Length Of Unit | 17.97ft in | 5,477mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.6ft in | 3,840mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.45ft in | 2,576mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 20.03ft in | 6,105mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 9.54ft in | 2,908mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 12.31ft in | 3,752mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Long arm |
03 Dimensions Specification
| Width To Outside Of Tracks | 6.53ft in | 1,990mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 18.05ft in | 5,502mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.06ft in | 323mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.45ft in | 2,576mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 3.27ft in | 997mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 15.7in | 399mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
05 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Perkins | |
| Engine Model | 404F-22T | |
| Gross Power | 58.9hp | 43.9kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2440rpm | |
| Displacement | 135.2cu in | 2,216cm3‖ — metric converted from the published imperial value |
| Aspiration | Water-cooled |
06 Operational Specification
| Operating Weight | 14178lb | 6,431kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 21.9gal | 82.9l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 19.3gal | 73.1l‖ — metric converted from the published imperial value |
| Hydraulic System Relief Valve Pressure | 3336psi | 23,001kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 41.6gal/min | 157l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.