Specification sheet Wheel Loader Ref wacker-neuson-850-wheel-loader
Wacker Neuson 850
The Wacker Neuson 850 is a wheel loader with an operating weight of 9,920.71 lb (4,499.96 kg), a 60.3 hp engine, and a 1.11 yd³ (0.85 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,920.71lb
4,499.96kg
Engine power
60.3hp
44.97kW
Gross Power Bucket capacity
1.11yd³
0.85m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson 850 sits below the median for its class:
- Operating weight 9,920 lb lighter than 76% (n=374)
- Engine power 60 hp less powerful than 63% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 67% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Deutz | |
| Gross Power | 60.3hp | 45kw |
| Displacement | 220.8cu in | 3.7L |
02 Operational Specification
| Operating Weight | 9920.7lb | 4500kg |
|---|---|---|
| Fuel Capacity | 15.6gal | 59.1L |
| Hydraulic System Fluid Capacity | 13.3gal | 50L |
| Static Tipping Weight | 7054.8lb | 3200kg |
| Turning Radius | 11.4ft in | 3450mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps | |
| Rear Axle Oscillation | 22degrees | |
| Tire Size | 12.5 - 20 |
03 Transmission Specification
| Transmission Type | Continuously variable hydrostatic axial-piston gearbox | |
|---|---|---|
| Max Speed - Forward | 12.4mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|---|---|
| Pump Flow Capacity | 19.6gal/min | 74L/min |
| Raise Time | 5.5sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.7sec | |
| Pump Type | Gear pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.11yd3 | 0.85m3 |
| Breakout Force | 7868.3lb | 35kN |
06 Dimensions Dimensions
| Length With Bucket On Ground | 16.54ft in | 5040mm |
|---|---|---|
| Width Over Tires | 5.65ft in | 1720mm |
| Height To Top Of Cab | 8.24ft in | 2510mm |
| Wheelbase | 6.3ft in | 1920mm |
| Hinge Pin - Max Height | 10.67ft in | 3250mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.