Specification sheet Wheel Loader Ref wacker-neuson-8115l-wheel-loader
Wacker Neuson 8115L
The Wacker Neuson 8115L is a wheel loader with an operating weight of 13,338 lb (6,050.02 kg), a 100 hp engine, and a 1.5 yd³ (1.15 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
13,338lb
6,050.02kg
Engine power
100hp
74.6kW
Net Power Bucket capacity
1.5yd³
1.15m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson 8115L sits in the middle of its class:
- Operating weight 13,340 lb heavier than 58% (n=374)
- Engine power 100 hp more powerful than 80% (n=367)
- Bucket capacity 1.5 yd³ larger-bucket than 56% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Deutz | |
|---|---|---|
| Net Power | 100hp | 74.6kw |
| Power Measured @ | 2300rpm | |
| Displacement | 219cu in | 3.6L |
02 Operational Specification
| Payload | 6393lb | 2899.9kg |
|---|---|---|
| Operating Weight | 13338lb | 6050.1kg |
| Fuel Capacity | 31.7gal | 120L |
| Hydraulic System Fluid Capacity | 16.9gal | 64L |
03 Transmission Specification
| Travel Speed | 12.4mph | 20km/h |
|---|
04 Hydraulic System Specification
| Pump Flow Capacity | 22.2gal/min | 84.1L/min |
|---|---|---|
| Relief Valve Pressure | 3481psi | 24000.7kPa |
05 Bucket Dimensions
| Bucket Capacity - Heaped | 1.5yd3 | 1.15m3 |
|---|---|---|
| Bucket Width | 7.06ft in | 2150.11mm |
| Breakout Force | 9419lb | 41.9kN |
| Tipping Load Standard Bucket | 9479.79lb | 4299.96kg |
06 Dimensions Dimensions
| Ground Clearance | 1.28ft in | 389.89mm |
|---|---|---|
| Length With Bucket On Ground | 19.03ft in | 5800.09mm |
| Width Over Tires | 6.47ft in | 1970.03mm |
| Height To Top Of Cab | 8.8ft in | 2679.96mm |
| Wheelbase | 7.06ft in | 2150.11mm |
| Hinge Pin - Max Height | 11.95ft in | 3639.83mm |
| Reach At Max Lift And Dump | 9.75ft in | 2969.26mm |
| Turning Radius - Inside | 9.68ft in | 2949.96mm |
| Center Edge To Center Of Front Axle | 6.66ft in | 2029.97mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.