Specification sheet Wheel Loader Ref wacker-neuson-8085t-wheel-loader
Wacker Neuson 8085T
The Wacker Neuson 8085T is a wheel loader with an operating weight of 12,125.3 lb (5,499.95 kg), a 73.7 hp engine, and a 1.11 yd³ (0.85 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,125.3lb
5,499.95kg
Engine power
73.7hp
55kW
Net Power Bucket capacity
1.11yd³
0.85m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson 8085T sits in the middle of its class:
- Operating weight 12,130 lb lighter than 53% (n=374)
- Engine power 74 hp more powerful than 52% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 67% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Deutz | |
|---|---|---|
| Net Power | 73.7hp | 55kw |
02 Operational Specification
| Payload | 5511.5lb | 2500kg |
|---|---|---|
| Operating Weight | 12125.3lb | 5500kg |
| Fuel Capacity | 22.1gal | 83.7L |
| Hydraulic System Fluid Capacity | 52.8gal | 199.9L |
| Operating Voltage | 12V |
03 Hydraulic System Specification
| Pump Flow Capacity | 18.2gal/min | 68.9L/min |
|---|---|---|
| Relief Valve Pressure | 3481psi | 24000.7kPa |
04 Bucket Dimensions
| Tipping Load Standard Bucket | 6349.3lb | 2880kg |
|---|---|---|
| Bucket Width | 6.4ft in | 1950mm |
| Bucket Capacity - Heaped | 1.11yd3 | 0.85m3 |
05 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330mm |
|---|---|---|
| Width Over Tires | 5.84ft in | 1780mm |
| Height To Top Of Cab | 8.14ft in | 2480mm |
| Wheelbase | 6.63ft in | 2020mm |
| Hinge Pin - Max Height | 15.39ft in | 4690mm |
| Reach At Max Lift And Dump | 3.55ft in | 1080mm |
| Overall Length | 19.26ft in | 5870mm |
| Center Edge To Center Of Front Axle | 7.45ft in | 2270mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.