Specification sheet Wheel Loader Ref wacker-neuson-8085-wheel-loader
Wacker Neuson 8085
The Wacker Neuson 8085 is a wheel loader with an operating weight of 10,471.9 lb (4,749.98 kg), a 73.7 hp engine, and a 1.11 yd³ (0.85 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,471.9lb
4,749.98kg
Engine power
73.7hp
54.96kW
Gross Power Bucket capacity
1.11yd³
0.85m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson 8085 sits below the median for its class:
- Operating weight 10,470 lb lighter than 69% (n=374)
- Engine power 74 hp more powerful than 52% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 67% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Deutz | |
|---|---|---|
| Engine Model | TCD 2.9 | |
| Gross Power | 73.7hp | 55kw |
| Displacement | 176.9cu in | 2.9L |
02 Operational Specification
| Payload | 4739.9lb | 2150kg |
|---|---|---|
| Operating Weight | 10471.9lb | 4750kg |
| Fuel Capacity | 22.1gal | 83.7L |
| Hydraulic System Fluid Capacity | 52.8gal | 199.9L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 77amps |
03 Transmission Specification
| Transmission Type | Continuously variable hydrostatic axial-piston gearbox | |
|---|---|---|
| Max Speed - Forward | 20mph | 32.2km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|
05 Bucket Dimensions
| Breakout Force | 9172lb | 40.8kN |
|---|---|---|
| Bucket Capacity - Heaped | 1.11yd3 | 0.85m3 |
| Tipping Load Standard Bucket | 8046.8lb | 3649.97kg |
06 Dimensions Dimensions
| Ground Clearance | 1.09ft in | 330mm |
|---|---|---|
| Length With Bucket On Ground | 17.33ft in | 5280mm |
| Width Over Tires | 5.84ft in | 1780mm |
| Height To Top Of Cab | 8.14ft in | 2480mm |
| Wheelbase | 6.63ft in | 2020mm |
| Hinge Pin - Max Height | 10.8ft in | 3290mm |
| Reach At Max Lift And Dump | 2.09ft in | 635mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.