Wacker Neuson 8003
The Wacker Neuson 8003 is a mini excavator with a 69.5 hp engine, and a dig depth of 14.08 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Wacker Neuson 8003 sits at the heavy end of its class:
- Engine power 70 hp more powerful than 98% (n=448)
- Dig depth 14.1 ft deeper-digging than 97% (n=426)
Not positioned on operating weight — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 21.56ft in | 6,571mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Height Of Unit | 8.9ft in | 2,713mm‖ — metric converted from the published imperial value |
| Max Loading Height | 15.88ft in | 4,840mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 23.04ft in | 7,023mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 14.08ft in | 4,292mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Standard arm |
02 Boom/Stick Option (Hex) 2 Specification
| Shipping Length Of Unit | 21.56ft in | 6,571mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Loading Height | 16.51ft in | 5,032mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.9ft in | 2,713mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 23.96ft in | 7,303mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 14.08ft in | 4,292mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Long Arm |
03 Dimensions Specification
| Width To Outside Of Tracks | 7.39ft in | 2,252mm‖ — metric converted from the published imperial value |
|---|---|---|
| Height To Top Of Cab | 8.9ft in | 2,713mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Max Travel Speed | 3.2mph | 5.1km/h‖ — metric converted from the published imperial value |
|---|
05 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV98 | |
| Gross Power | 69.5hp | 51.8kw‖ — metric converted from the published imperial value |
06 Operational Specification
| Hydraulic System Fluid Capacity | 26.2gal | 99.2l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Relief Valve Pressure | 4351psi | 29,999kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 44gal/min | 167l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.