Specification sheet Wheel Loader Ref wacker-neuson-750t-wheel-loader
Wacker Neuson 750T
The Wacker Neuson 750T is a wheel loader with an operating weight of 11,243 lb (5,099.74 kg), a 60.3 hp engine, and a 1.5 yd³ (1.15 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
11,243lb
5,099.74kg
Engine power
60.3hp
45kW
Net Power Bucket capacity
1.5yd³
1.15m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Wacker Neuson 750T sits in the middle of its class:
- Operating weight 11,240 lb lighter than 60% (n=374)
- Engine power 60 hp less powerful than 63% (n=367)
- Bucket capacity 1.5 yd³ larger-bucket than 56% (n=309)
01 Engine Specification
| Engine Make | Deutz | |
|---|---|---|
| Net Power | 60.3hp | 45kw |
02 Operational Specification
| Payload | 3814lb | 1730.1kg |
|---|---|---|
| Operating Weight | 11243lb | 5099.8kg |
| Tire Size | 12.5-18 |
03 Transmission Specification
| Travel Speed | 12.4mph | 20km/h |
|---|
04 Hydraulic System Specification
| Pump Flow Capacity | 18.5gal/min | 70.1L/min |
|---|---|---|
| Relief Valve Pressure | 3045.8psi | 21000.1kPa |
05 Bucket Dimensions
| Breakout Force | 11015.6lb | 49kN |
|---|---|---|
| Bucket Capacity - Heaped | 1.5yd3 | 1.15m3 |
| Tipping Load Standard Bucket | 5952.8lb | 2700.15kg |
06 Dimensions Dimensions
| Height To Top Of Cab | 14.8ft in | 4510mm |
|---|---|---|
| Hinge Pin - Max Height | 15.29ft in | 4660mm |
| Reach At Max Lift And Dump | 4.04ft in | 1230mm |
?Questions & answersfrom this machine's data
- How much does a Wacker Neuson 750T wheel loader weigh?
- A Wacker Neuson 750T wheel loader has an operating weight of 11,243 lb (5,099.7 kg).
- What engine does a Wacker Neuson 750T wheel loader have?
- A Wacker Neuson 750T wheel loader is powered by a Deutz engine producing 60.3 hp (45 kW).
- What size bucket does a Wacker Neuson 750T wheel loader have?
- A Wacker Neuson 750T wheel loader has a bucket capacity of 1.5 yd³ (1.2 m³).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.