Wacker Neuson 50Z3
The Wacker Neuson 50Z3 is a mini excavator with a 48.1 hp engine, and a dig depth of 11.49 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Wacker Neuson 50Z3 sits at the heavy end of its class:
- Engine power 48 hp more powerful than 94% (n=448)
- Dig depth 11.5 ft deeper-digging than 87% (n=426)
Not positioned on operating weight — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 18.05ft in | 5,502mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 17.39ft in | 5,300mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.08ft in | 3,682mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 19.23ft in | 5,861mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.76ft in | 2,670mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.49ft in | 3,502mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Standard arm |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 17.92ft in | 5,462mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Length Of Unit | 18.05ft in | 5,502mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.6ft in | 3,840mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.21ft in | 2,502mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 20.03ft in | 6,105mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 9.21ft in | 2,807mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 12.31ft in | 3,752mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | long arm |
03 Dimensions Specification
| Width To Outside Of Tracks | 6.53ft in | 1,990mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 1.01ft in | 308mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.44ft in | 2,573mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 15.75in | 400mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Travel Speed | 2.9mph | 4.7km/h‖ — metric converted from the published imperial value |
05 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV98 | |
| Gross Power | 48.1hp | 35.9kw‖ — metric converted from the published imperial value |
06 Operational Specification
| Fuel Capacity | 22gal | 83l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic System Fluid Capacity | 21.2gal | 80.3l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 3481psi | 24,001kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 44gal/min | 167l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.