Wacker Neuson 3503
The Wacker Neuson 3503 is a mini excavator with an operating weight of 9,449 lb, a 40 hp engine, and a dig depth of 10.62 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Wacker Neuson 3503 sits above the median for its class:
- Operating weight 9,450 lb heavier than 84% (n=438)
- Engine power 40 hp more powerful than 84% (n=448)
- Dig depth 10.6 ft deeper-digging than 74% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 17.07ft in | 5,203mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 16.13ft in | 4,916mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 7.85ft in | 2,393mm‖ — metric converted from the published imperial value |
| Max Loading Height | 11.88ft in | 3,621mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 17.05ft in | 5,197mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 6.85ft in | 2,088mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.62ft in | 3,237mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Standard arm |
02 Boom/Stick Option (Hex) 2 Specification
| Max Cutting Height | 16.78ft in | 5,115mm‖ — metric converted from the published imperial value |
|---|---|---|
| Shipping Length Of Unit | 17.07ft in | 5,203mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.53ft in | 3,819mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 7.85ft in | 2,393mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 18ft in | 5,486mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 7.73ft in | 2,356mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 11.6ft in | 3,536mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 2 | Long arm |
03 Dimensions Specification
| Width To Outside Of Tracks | 5.32ft in | 1,622mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 17.07ft in | 5,203mm‖ — metric converted from the published imperial value |
| Ground Clearance | 0.92ft in | 280mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 7.85ft in | 2,393mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.56ft in | 1,390mm‖ — metric converted from the published imperial value |
04 Undercarriage Specification
| Shoe Size | 12in | 305mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Pressure | 47psi | 324kpa‖ — metric converted from the published imperial value |
| Max Travel Speed | 3.4mph | 5.5km/h‖ — metric converted from the published imperial value |
05 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | Perkins | |
| Engine Model | 404F-22 | |
| Gross Power | 40hp | 30kw‖ — metric converted from the published imperial value |
| Power Measured @ | 1975rpm | |
| Aspiration | Water-cooled |
06 Operational Specification
| Operating Weight | 9449lb | 4,286kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 13.7gal | 51.9l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 13.2gal | 50l‖ — metric converted from the published imperial value |
| Operating Voltage | 12V | |
| Hydraulic System Relief Valve Pressure | 3481psi | 24,001kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 30.1gal/min | 114l/min‖ — metric converted from the published imperial value |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.